Avaya 3600 Series 사용자 설명서

Overview  The WT will need to have its Battery Pack recharged 

periodically. The Nickel Metal Hydride (NiMH) rechargeable 
WT Battery Pack gives you four hours of talk time or 80 hours 
of stand-by time (unless PTT is enabled in the 3626 Wireless 
Telephon only). Stand-by time is when the handset is turned on, 
but not in an active call. 

The WT will notify you when the charge on the Battery Pack is 
low by displaying the battery icon. If you are in a call you will 
hear a soft beep through the earpiece every thirty seconds. The 
user has 15–30 minutes of battery life left.  The alerts will 
increase to every six seconds when there is about one minute of 
battery life left. 

Not in call: The message Low Battery and a loud beep indicate a 
critically low Battery Pack charge. These occur when the user is 
not in a call.  The WT will not work until the Battery Pack is 
charged. 

Caution:  Take care not to short the battery contacts on the Battery Pack 

with metal objects such as coins, keys or paper clips. Shorting 
the contacts can cause permanent damage. 

To remove, press down on the latch on the Battery Pack on the 
back of the WT. The Battery Pack releases outward. 

To replace, slide the lip of the Battery Pack into the bottom of 
the cavity. Push the top of the Battery Pack until it snaps into 
place. You should not have to force it against the WT. 

To remove, hold the handset in one hand with the keypad facing 
up. Press both Battery Pack release buttons (on the left and right 
sides of the handset) at the same time. The Battery Pack will 
release downward. You may catch it with the palm of your other 
hand. If the Battery Pack does not release, gently shake the 
handset while pressing both release buttons. Do not pry.  

To replace, slide the Battery Pack straight into the cavity until it 
snaps into place. You should not have to force it against the WT. 

If you are using the Telephony Gateway in your telephone 
system the Battery Pack may be changed while the call is still in 
progress. Do not press 

 on the WT. Quickly remove the 

discharged Battery Pack and replace with a charged Battery 
Pack, then press 

to turn the WT back on. Press 

to

resume the call in progress.  

Battery Pack note  Battery Packs are not interchangeable. The 3626 WT uses the 

distinctive square model BPX100 Battery Pack. The Battery 
Packs for the 3616 and 3620 WTs are the same rounded shape 
but different colors. The 3616 model BPE100 Battery Pack is 
black; the 3620 model BPN100 Battery Pack is steel blue. 

•  Only use Avaya Battery Packs with 

Avaya

 

WTs

. 

21-300632, Issue 1, July 2005 

Page 21