AT&T 945 사용자 설명서

다운로드
페이지 103
9
If you are installing multiple phones in your telephone system, you must
install and program one set at a time. If more than one extension
is assigned the same extension number, a repeating short ring (error
ring) will sound at all extensions. Reassign extension numbers, being
sure that each extension has a different number from 11 to 26 (see
“Assign an Extension Number to Your Phone” on page 21).
Battery Installation
Install a 9V alkaline battery (purchased separately) in order to use some
features of this telephone in the event of a power failure. If power fails and 
a working battery is installed, all four lines of this phone will work only to
answer calls with the handset or headset, and to dial calls using the key pad
and the One Touch or Redial features. No other features will work until
power is restored.
Remove the wedge from the underside of the base unit.
Press on the tabs in the direction of the arrows and pull the wedge
away from the phone.
2
Remove the battery compartment screw with a small
Phillips head screwdriver.
continued on page 10
INST
ALLA
TION
INST
ALLA
TION
INSTALLATION