AltiGen comm ACM 5.1 사용자 설명서
Chapter 8: Multilingual Configuration
AltiWare ACM 5.1 Administration Manual 109
Using DNIS to Set the Language
If your company has multiple phone numbers, you can configure AltiWare to direct a
caller to prompts in a selected language based on the phone number the caller has
dialed.
caller to prompts in a selected language based on the phone number the caller has
dialed.
To direct specified DNIS calls to a selected-language AA or extension:
1. Select PBX > In Call Routing Configuration > DNIS Routing tab .
2. Click the Add button to add a number.
3. Select where you want to route callers who have dialed that number.
4. Select the appropriate language from the Language Setting drop-down list.
5. Click Apply.
2. Click the Add button to add a number.
3. Select where you want to route callers who have dialed that number.
4. Select the appropriate language from the Language Setting drop-down list.
5. Click Apply.
Figure 5. Configuring the language setting in DNIS