AltiGen comm ACM 5.1 사용자 설명서

Chapter 25:  Enterprise VoIP Network Management

AltiWare ACM 5.1 Administration Manual 343

The Server ID is used for the following two purposes:

•

Identifying member systems in the VoIP domain

•

Mapping to a remote system's IP address in the IP dialing table for system-to-system 
dialing

Depending on the number of systems that will be added to the VoIP domain and  the 
number of entries in the IP dialing table, the Server ID Length can be set to 1, 2, or 3 
digits.

The Server ID Length can be changed. However, if this number is changed, 
the server IDs  are all altered. If you increase the length, the number 0 is added 
to the front of the server IDs. For example, if you change the length from 2 to 
3, original ID 02 and 27 will become 002 and 027 respectively. If you change 
the length from 3 to 2, the original IDs 112 and 311 will become 12 and 11. It 
is advisable to keep the original length. If you are not sure about future 
expansion, using a 3-digit length is advised.

Before you add a server to the domain, you need to make sure that the 
System ID (specified in AltiWare Administrator, System Configuration tab) 
is not the same as another member server’s System ID. AltiEnterprise 
Manager will use the System ID to build a unique identifier in the multisite 
database. Once a server is joined to a domain, you cannot change the 
System ID in AltiWare Administrator.

1. Click the Add button in the Global Server Location panel to open the Add Server 

dialog box:

 

2. Define the attributes for the server, and click OK:

Enter the name of the server.

Address 

Enter the IP address of the server.

Server ID 

A unique dialing number to connect to this server.