AltiGen comm ACM 5.1 사용자 설명서
Chapter 5: Gateway Management
AltiWare ACM 5.1 Administration Manual 81
Setting Parameters
To read or set parameters for a specific gateway, first select the gateway in the All
Gateways list. After making changes to a gateway, click Apply before selecting another
gateway. When you are finished with the window, click Close.
Gateways list. After making changes to a gateway, click Apply before selecting another
gateway. When you are finished with the window, click Close.
Parameter
Description
All Gateways
Lists all gateways that have been added using
the Add button in this window.
the Add button in this window.
Status
Shows the status of the selected gateway:
active, disconnected, initializing, resetting,
failed. (Read-only field.)
active, disconnected, initializing, resetting,
failed. (Read-only field.)
Name
The name you gave the selected gateway for
easy identification.
easy identification.
Address
The IP address of the selected gateway.
Password
The password assigned to the selected gateway.
(Each AltiGateway has its own password.)
(Each AltiGateway has its own password.)
Country
The country where the gateway resides. This
configuration determines what tone table will be
used for the gateway. Extension users assigned
to this gateway will hear different off-hook and
busy tones, for example, if this parameter is set
differently from the AltiWare system setting.
configuration determines what tone table will be
used for the gateway. Extension users assigned
to this gateway will hear different off-hook and
busy tones, for example, if this parameter is set
differently from the AltiWare system setting.
Home IP Exts
The number of IP extensions that have been
assigned to the selected gateway in the
Extension Configuration window. (Read-only
field.) This information will help you configure
sufficient resources for IP phones on each
gateway.
assigned to the selected gateway in the
Extension Configuration window. (Read-only
field.) This information will help you configure
sufficient resources for IP phones on each
gateway.
CT-Bus Mode
The CT bus is the telephony switching bus that
connects all telephony boards inside each
gateway. It can be set as Mu-Law or A-Law. The
default is Mu-Law for North America. For
European countries and regions that are using
E1 digital trunk, this setting needs to be changed
to A-Law.
connects all telephony boards inside each
gateway. It can be set as Mu-Law or A-Law. The
default is Mu-Law for North America. For
European countries and regions that are using
E1 digital trunk, this setting needs to be changed
to A-Law.