Avaya 4600 Series 사용자 설명서
Server Administration
TFTP
4-17
TFTP
4
This section describes how to set up a TFTP server for downloading software updates to the 4600
Series IP Telephones.
Series IP Telephones.
WARNING:
The files defined by the TFTP server configuration have to be accessible from all IP
Telephones. Ensure that the filenames match the names in the upgrade script, including
case, since UNIX systems are case sensitive.
Telephones. Ensure that the filenames match the names in the upgrade script, including
case, since UNIX systems are case sensitive.
TFTP Generic Setup
4
The following phases are involved in setting up a TFTP server.
■
Install the TFTP server software. The section below describes how to install and configure
Avaya’s TFTP application.
Avaya’s TFTP application.
■
Configure the file path parameter to the directory where the files are to be stored. This is the
file path in line 6 of Table 4-2. For increased security, it is also recommended that you disable
the ability to upload to the server. Note that this option may be not available to all TFTP
servers.
file path in line 6 of Table 4-2. For increased security, it is also recommended that you disable
the ability to upload to the server. Note that this option may be not available to all TFTP
servers.
■
In addition, you may wish to enable the transfer size option (tsize) if your TFTP server supports
it. This will allow the IP telephone to display the progress of the transfer by displaying the total
number of data blocks.
it. This will allow the IP telephone to display the progress of the transfer by displaying the total
number of data blocks.
Avaya TFTP (Suite Pro)
4
Configuration
4
Use the following procedure to configure the Avaya TFTP server:
1.
Run the TFTP Suite Pro server by selecting
Start->Programs->Avaya TFTP Server >TFTPServer32.
Start->Programs->Avaya TFTP Server >TFTPServer32.
The TFTP server is started.
WARNING:
You must re-start Avaya TFTP manually every time you reboot your TFTP server
machine.
machine.