Viewsonic PJ751 사용자 설명서

ViewSonic  PJ751

Caution: Mistaken use of the mouse/keyboard control could damage your equipment.
• Only connect to a PC.
• Before connecting, read the manual of the device you will connect.
• Do not plug or unplug the connector cables while the computer is operating.

Turn off the projector and PC power, then connect the projector’s CON-

TROL terminal to the computer via the mouse cable.

If a USB cable is connected, disconnect it. If a USB cable is connected, the 

USB control function is given priority and mouse control from the CON-

TROL terminal will not function.

Turn on the projector power, then the computer. The functions in the table 

below can be controlled. If you have difficulty with control, restart the 

computer (either from the software or by pressing the restart button).

Connect the projector’s USB terminal to the computer using a USB cable. 

The functions listed below can be controlled.

NOTES:
• Using the remote control, it may not be possible to control notebook PCs, and other computers 

with built-in pointing devices (e.g. track balls). In this case, before connecting go into BIOS (sys-

tem setup), select external mouse, and disable the pointing devices. In addition, the mouse may 

not function if the computer does not have the needed utility program. See your computer’s hard-

ware manual for details.

• The USB control can be used with Windows 95 OSR 2.1 or higher. 
• The USB control can only be used for the functions listed above. You cannot do things such as 

press two buttons at once (for instance, pressing two buttons at the same time to move the mouse 

pointer diagonally).

• This function is not available while the lamp is warming up (the POWER indicator flashes green), 

while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the 

screen, using the BLANK function, or for displaying the menu. 

Move Pointer

Use  

button

Left click with mouse

Press  

button

Right click with mouse

Press  

button

Move Pointer

Use  

button

Left click with mouse

Press  

button

Right click with mouse

Press  

button