Panasonic DW10000U 사용자 설명서
ENGLISH –
117
Information
Model No.
PT-D10000U
PT-DW10000U
Interface
ports
RGB2 input
terminal
terminal
1 set of high-density, D-sub 15p (female)
[For YP
[For YP
B
P
R
input]
Y: 1.0 V [p-p] synchronization signal included, P
B
P
R
: 0.7 V [p-p] 75
Ω
[For RGB input]
0.7 V [p-p] 75
Ω For G-SYNC: 1.0 V [p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically adjusted
HD/SYNC, and VD terminals are not compliant with 3-value direct SYNC.
•
Video input/
output terminal
output terminal
1 set BNC
1.0 V [p-p] 75
Ω (Active through for Video output)
S-video input
terminal
terminal
1 set Mini DIN 4p
Y 1.0 V [p-p] C 0.286 V [p-p] 75
Ω Compliant with S1 signals
DVI-D input
terminal
terminal
1 set
DVI 1.0 compliant
HDCP (Single link only) compatible
LAN terminal
1 set (Used for network connection)
10BASE-T/100BASE-TX
PJLink™ compatible
Serial input/
output terminal
output terminal
D-sub 9-pin (female/male), RS-232C compliant
Used for personal computer control
Remote1 input/
output terminal
output terminal
1 set each for M3 pin jack
Wired remote control, used for link control
Remote2 terminal
D-sub 9p (female)
Used for external control
Length of power supply cord
3.0 m (9.1´)
Cabinet
Molded resin
Outside dimensions
Width: 578 mm (22.8˝), Height : 320 mm (12.6˝), Depth: 643 mm (25.3˝)
Working environment
condition
condition
32 kg (71 lb) (without lens)
Working environment
condition
condition
Ambient temperature
*3
: 0 °C to 45 °C
Ambient humidity: 10 % to 80 % (no condensation)
Remote
control
Power source
3 V DC (two AA dry cells)
Operation range
approx. 30 m (98´5˝) (in front of beam receiver)
Mass
134 g (0.31 lb) (including dry cells)
Outside
dimensions
dimensions
Width: 51 mm (2˝), Thickness: 23 mm (0.9˝), Depth: 176 mm (6.9˝)
Option
Hanging attachment (For high ceiling): ET-PKD100H
Hanging attachment (For low ceiling): ET-PKD100S
Projection lens:
Hanging attachment (For low ceiling): ET-PKD100S
Projection lens:
ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4,
ET-D75LE5, ET-D75LE6, ET-D75LE8
DVI-D input module:
ET-MD77DV
SD-SDI input module:
ET-MD77SD1
HD/SD-SDI input module:
ET-MD77SD3
Replacement Lamp Unit:
ET-LAD10000 (single bulb),
ET-LAD1000F (4 bulbs)
*1 Interlace signals are not supported even when the EDID2 mode is selected.
*2 70˝ – 300˝ for ET-D75LE5
*3 If using the projector at high altitudes (1 400 m (4605.3´) - 2 700 m (8881.5´)), the ambient operating
*2 70˝ – 300˝ for ET-D75LE5
*3 If using the projector at high altitudes (1 400 m (4605.3´) - 2 700 m (8881.5´)), the ambient operating
temperature should be 0°-40°C.