Panasonic DW10000U 사용자 설명서

The automatic setup function can be used to 
automatically adjust the resolution, clock phase and 
picture position when analog RGB signals consisting 
of bitmap images such as computer signals are being 
input, or to automatically adjust the picture position 
when DVI-D signals are being input. (Automatic 
adjustment cannot be carried out when moving 
pictures are being input.)
It is recommended to supply images with a bright 
white frame at the outermost periphery containing 
characters etc. that are clear in white and black 
contrast when the system is in automatic adjustment 
mode. Avoid supplying images that involve halftones 
or gradation such as photographs and computer 
graphics.

A message “COMPLETE” appears if adjustment 
is ended normally.

“CLOCK PHASE” may have been shifted even 
when the adjustment ended normally. In this case, 
manually adjust the “CLOCK PHASE”.

If an image with blurred edges or a dark image is 
supplied, a message “INCOMPLETE” appears, 
indicating the automatic adjustment was 
unsuccessful. In this case, manually adjust the items 
of “INPUT RESOLUTION”, “CLOCK PHASE” and 
“SHIFT”.

For specific signals and long-sideways (or 
landscape) signals such as 16:9, adjustment should 
be made according to “AUTO SETUP” in the option 
menu.

Automatic adjustment may not be available 
depending on the machine type of the personal 
computer.

Automatic adjustment may not available for 
synchronization signal of C-SYNC and G-SYNC.

Image may be distorted for several seconds during 
automatic adjustment. This is not a malfunction.

For every supplied signal, adjustment is required.

Automatic adjustment can be cancelled by pressing 
the MENU button during the course of automatic 
adjustment.

•

•

•

•

•

•

•

•

•

Button illumination for the remote control can be 
turned on.

If no operations are carried out for approximately 
10 seconds, button illumination will turn off 
automatically.

“P IN P” (pp. 72-73), “SUB MEMORY” (p. 41) or 
“SYSTEM SELECTOR” (p. 54) operations can be 
assigned to the FUNC1 button on the remote control 
so that it can be used as an easy shortcut button.

Refer to “Setting FUNC1” for details. (p. 73)

The projector has eight types of internal test patterns 
to check the condition of the set.
To display test patterns, follow the steps below.

Setting is also possible by using an on-screen 
menu. Refer to “Displaying the internal test pattern” 
for details. (p. 83)

Results of adjustment on the image, picture quality, 
position, size and other factors will not be reflected 
in test patterns. Be sure to display the input signal 
before performing various kinds of setting.

•

•

•

•