Samsung HLT4675S 사용자 가이드

1  Plug the incoming cable into the ANT 1 IN(CABLE) terminal on the side of the TV.

➢ 

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable 

channels. 

1  Find the cable that is connected to the ANT OUT terminal on your cable box.

➢ 

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

2  Connect the other end of this cable to the ANT 1 IN(CABLE) terminal on the side of the TV.

two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)
1  Find and disconnect the cable that is connected 

to the ANT IN terminal on your cable box.

➢ 

This terminal might be labeled “ANT IN”, “VHF IN” 

or simply, “IN”.

2  Connect this cable to a two-way splitter.

3  Connect an Antenna cable between an OUTPUT 

terminal on the splitter and the IN terminal on the 

cable box.

4  Connect an Antenna cable between the ANT OUT 

terminal on the cable box and the B-IN terminal 

on the RF (A/B) switch.

5  Connect another cable between the other OUT 

terminal on the splitter and the A-IN terminal on 

the RF (A/B) switch.

6   Connect the last Antenna cable between the OUT 

terminal on the RF (A/B) switch and the ANT IN 1 

(CABLE) terminal on the side of the TV.

 

After you have made this connection, set the 

A/B switch to the “A” position for normal viewing. 

Set the A/B switch to the “B” position to view 

scrambled channels. (When you set the A/B 

switch to “B”, you will need to tune your TV to 

the cable box’s output channel, which is usually 

channel 3 or 4.)