Samsung HLT4675S 사용자 가이드
English - 55
Upgrading the Software
Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG to
receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive
to the USB port located on the back of your TV.
1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the back
of the TV.
2 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select
Setup, then press the ENTER button.
3 Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button.
4 Press the ▲ or ▼ button to select USB, then press the ENTER button.
4 Press the ▲ or ▼ button to select USB, then press the ENTER button.
The message
Scanning for USB... It may take up to 30 seconds. is displayed.
5 If the firmware on the USB is properly recognized, the message Upgrade version xxxx to
version xxxx? The system would be reset after upgrade. is displayed.
Press the ◄ or ► button to select
OK, then press the ENTER button. The upgrade starts.
Please be careful to not disconnect the power or remove the USB drive while upgrades are
being applied.
The TV will shut off and turn on automatically after completing the firmware upgrade.
Please check the firmware version after the upgrades are complete.
➢
The firmware and upgrade process may be different by country and region.
Picture
Move
Enter
Return
More
Film Mode
: Off
►
Function Help
: On
►
SW Upgrade
►
▲
Move
Enter
Setup
Return
Picture
Move
Enter
Return
USB
►
Move
Enter
SW Upgrade
Return
Plug & Play
Upgrade version
XXXX
to version
XXXX
? The
system would be reset after upgrade.
OK
Cancel
Software Upgrade
Scanning for USB...
It may take up to 30 seconds.
Software Upgrade