Samsung LN437W 사용자 설명서
67
Special Features
66
Swapping the Contents of the PIP and Main image
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter. Quick way to access PIP
Swap: Just press “Swap” on
the remote control.
PIP, then press the joystick to
enter. Quick way to access PIP
Swap: Just press “Swap” on
the remote control.
2
Move the joystick down to
select “Swap”.
3
Move the joystick to the right or
left.
The channel in the PIP image will
appear in the main image, and
vice versa.
appear in the main image, and
vice versa.
4
Press Menu to exit.
NOTE
• When ANT-B, Component mode, PC, or DVI is selected, the PIP Swap function doesn’t work.
Selecting a Signal Source (Antenna or Cable) for PIP
If the PIP source is TV during PIP ON, you can select the broadcasting source of PIP picture sepa-
rately from the main picture. (If the main picture is ANT-B and the broadcasting sources are differ-
ent, making adjustments is necessary.)
rately from the main picture. (If the main picture is ANT-B and the broadcasting sources are differ-
ent, making adjustments is necessary.)
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter.
PIP, then press the joystick to
enter.
2
Move the joystick down to
select “Air or CATV”.
3
If an antenna is connected,
the setting is “AIR.” If a Cable
TV system is providing the sig-
nal, move the joystick to the
left or right until the appropri-
ate type of cable system is
displayed (“STD,” “HRC,” or
“IRC”).
TV system is providing the sig-
nal, move the joystick to the
left or right until the appropri-
ate type of cable system is
displayed (“STD,” “HRC,” or
“IRC”).
4
Press Menu to exit.