Samsung HL-R4262W 사용자 가이드
• For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves.
NOTES
• Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screw.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the
• After replacing the lamp, align the lamp cover with the groove and secure the screw.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the
protective circuit).
1
Unplug TV, then use a
screwdriver to remove the
screw.
screwdriver to remove the
screw.
2
Remove the Lamp cover.
3
Remove the screws securing
the Lamp by using a
screwdriver.
the Lamp by using a
screwdriver.
4
Separate the Lamp from the
engine by holding the handle
and pulling it out.
engine by holding the handle
and pulling it out.
5
To reinstall the Lamp, follow
these steps in reverse order.
these steps in reverse order.
English - 7
BP68-00493D-00Eng(02~13) 9/9/05 8:55 AM Page 7