Samsung PCJ 534RF 사용자 가이드

3.2

C

HAPTER

T

HREE

: O

PERATION

O

P E R AT I O N

While “Red” is highlighted (letters are
blue color), press the VOL+ button:   
A crosshair pattern will appear on the
screen. If either a vertical or a 
horizontal red line is visible, then the 
convergence needs alignment.

If a horizontal red line is 
visible, use CH

▲ and  CH▼ buttons

to move the line so that it is super-
imposed on the horizontal center-
line (i.e., make a single horizontal
line that is as white as possible.)

If a vertical red line is visible, use
the VOL + and VOL -  buttons to
move the line so that it is superim-
posed on vertical-center line (i.e.,
make a single vertical line that is as
white as possible.)

If the left adjustments need, press the
number(4) button on the remote control
to move the vertical red line to the left.
Use the VOL

to buttons to move the

line to the right or left.

If the right adjustments need, press the
number(6) button on the remote control
to move the vertical red line to the right.
Use the VOL

to buttons to move the

line to the right or left.

After the red convergence is correctly adjusted, press MENU four times
to exit all the menus.

▼

Note: While the left and

right adjustments are done, the
CH

▲ and  CH▼ buttons will not

work.

00583F(E)-CHAPTER 3  7/19/05  2:32 PM  Page 2