Samsung HL-S5686C 사용자 설명서

English-18

Press the POWER button on the remote control.
You can also use the 

(Power) button on the front of the panel.

When the TV is initially powered on, two basic settings proceed automatically and subsequently:

1

Press the 

POWER button on the remote control.

The message “Menu language, Channels and Time will
be set.” is displayed. 
Press the ENTER button, then “Select the language of
the OSD” menu is automatically displayed.

3

Press the 

ENTER button to enter the language. 

Press the 

or 

button to select language, then the 

ENTER button. 
“Select the antennas to memorize” menu is automatically
displayed.

4

Press the 

or 

button to memorize the channels of

the selected connection.
Press the 

ENTER button to select “Start”.

2

Press the 

or 

buttons to select “Shop” or “Home”,

then the 

ENTER button. 

If the antenna is connected to ANT 2 IN (AIR), select “Air” and if it is connected
to ANT 1 IN (CABLE), select “Cable”.
If both ANT 2 IN (AIR) and ANT 1 IN (CABLE) are connected, select “Air + Cable”.
In Cable mode, you can select the correct signal source among STD, HRC, and
IRC by pressing the 

or 

button, then press the ENTER button.

Contact your local cable company to identify the type of cable system that exists
in your particular area.

continued...

We recommend setting the TV to Home mode for the best picture in your 
home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop Mode, press and hold the 

button on the side panel of the TV for five seconds to return to Dynamic 
(Home) mode.

BP68-00620A-00Eng  9/14/06  5:27 PM  Page 18