Samsung SP46L3H 사용자 설명서
English - 38
Selecting the Sound Mode
(depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the side of the
television. If the mono sound comes out only from left
speaker, press the DUAL I-II button.
television. If the mono sound comes out only from left
speaker, press the DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual I/II
Regular broadcast
(Standard audio)
Bilingual or Dual I/II
Stereo
On-screen indication
Mono (Normal use)
NICAM Mono
↔ Mono
NICAM Stereo
↔ Mono
(Forced mono)
Mono
Dual I/II
↔ Dual I/II
Stereo
↔ Mono
(Forced mono)
NICAM Dual-1
→
NICAM Dual-2
→
Mono
NICAM
Stereo
A2
Stereo
BP68-00382A-00Eng 6/10/04 4:26 PM Page 38