Samsung HL-T5656W 사용자 설명서

1  Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the rear of the TV.

➢ 

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable 

channels.

1  Find the cable that is connected to the ANT OUT terminal on your cable box.

➢ 

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

2  Connect the other end of this cable to the ANT 1 IN (CABLE) terminal on the rear of the TV.

stores.)
1  Find and disconnect the cable that is connected 

to the ANT IN terminal on your cable box.

➢ 

This terminal might be labeled “ANT IN”,  

“VHF IN” or simply, “IN”.

2  Connect this cable to a two-way splitter.

3  Connect an Antenna cable between an OUTPUT 

terminal on the splitter and the IN terminal on the 

cable box.

4  Connect an Antenna cable between the ANT OUT 

terminal on the cable box and the B–IN terminal 

on the RF(A/B) switch.

5  Connect another cable between the other OUT 

terminal on the splitter and the A–IN terminal on 

the RF (A/B) switch.

6   Connect the last Antenna cable between the OUT 

terminal on the RF (A/B) switch and the ANT 1 IN 

(CABLE) terminal on the rear of the TV.

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to 

view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which 

is usually channel 3 or 4.)

BN68-00630E-Eng_1.indd   12

2007-04-09   ｿﾀﾈﾄ 5:55:45