Samsung HL-T5656W 사용자 설명서

1

 

Press to turn the TV on and off.

2

 

Remote Control Sensor 

Aim the remote control towards this spot on the TV.

3

 

Blinks and turns off when the power is on and lights up 

in stand-by mode.

4

 

Toggles between all the available input sources  

(TV, AV1, AV2, AV3, S-Video1, S-Video2, S-Video3, 

Component1, Component2, PC, HDMI1, or  

HDMI2/DVI).

5

 

Press to see an on-screen menu of your TV’s features.

6

 

Press to increase or decrease the volume. 

In the on-screen menu, use the 

+ VOL – buttons as 

you would use the ◄ and ► buttons on the remote 

control.

7

 

 

Press to change channels. 

In the on-screen menu, use the 

 buttons as 

you would use the ▲ and ▼ buttons on the remote 

control.

8

 

Press to confirm a selection.

 (

 : On, 

 : Blinking, 

 : Off)

 

Standby state.

The picture will automatically appear in about 15 seconds.

Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds.

A cooling fan inside the set is not operating normally.

Lamp cover on the rear of the set is not properly shut.
Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too 

high, the power will shut off.
Lamp may be defective. Please contact a certified technician.

➢

  ●  It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. 

 

●  The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working. 

➢

  ●  You can use the channel selection buttons to switch on the TV when it is in standby mode depending on the model. 

 

●  When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the 

▲/▼/◄/► buttons on the remote control. 

 

●  If the remote control no longer works or you have lost it, you can use controls on the panel of the TV.

Use the right side panel jacks to connect a component that is used only occasionally (a camcorder or video game, for example). The 

product color and shape may vary depending on the model.

1

 

Connect an S-Video signal from an S-VHS VCR or DVD player.

2

 

VIDEO 

Connect the video signal from a camcorder or video game.

3

 

Connect the audio signal from a camcorder or video game.

BN68-00630E-Eng_1.indd   8

2007-04-09   ｿﾀﾈﾄ 5:55:34