Samsung HL72A650C1F 사용자 설명서

Poor picture quality.

Try another channel.

Adjust the antenna.

Check all wire connections.

Poor sound quality.

Try another channel.

Adjust the antenna.

No picture or sound.

Try another channel.

Press the 

SOURCE button.

Make sure the TV is plugged in.

Check the antenna connections.

Make sure the 

MUTE button is off.

No sound or sound is too low at 

maximum volume.

First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable 

broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.

Picture rolls vertically.

Check all connections.

The TV operates erratically.

Unplug the TV for 30 seconds, then try operating it again.

The TV won’t turn on.

Make sure the wall outlet is working.

Remote control malfunctions

Replace the remote control batteries.

Clean the upper edge of the remote control (transmission window).

Check the battery terminals.

Press the 

TV button to put your remote control in the TV mode.

Make sure the remote has batteries.

Check that the “+” and “-” ends of the batteries are inserted correctly.

Digital broadcasting screen problem.

Please check the digital signal strength and input antenna.

The image is too light or too dark.

Adjust the Brightness and Contrast.

Adjust the Fine tuning.

The image is too large or too small.

Adjust the Size settings.

The visual qualities of digital channels 

vary.

The visual qualities of digital channels may vary depending on the original production method 

(analog or digital).

-  If the original production method is digital: High visual quality.

-  If the original production method is analog: The digital program displayed on the screen is 

originally an analog program which has been converted to digital. 

The visual quality is of an SD(Standard Definition) grade.

Screen is black and power indicator 

light blinks steadily.

On your computer; check the Power and Signal Cable.

The TV is using its power management system.

Move the computer’s mouse or press any key on the keyboard.
On your equipment check (STB, DVD, etc) ; Power and Signal Cable.

The TV is using its power management system.

Press the 

Source button on the panel or remote control.

Turn the TV off and on.

Although the TV caption shows HD, 

the visual quality is not satisfactory.

The HD(High Definition) caption that appears when switching channels or when pressing the 

Information button on the remote control means the selected channel is a digital channel. If the 

broadcasting station converts an analog signal into digital and transmits the signal, the visual 

quality may not be perfect.

A distorted picture appears in the

corner of the screen.

If 

Just Scan is selected in some external devices, a distorted picture may appear in the

corner of the screen. This symptom is caused by external devices, not the TV.

The “Resets all settings to the default 

values” message appears.

This appears when you press and hold the EXIT button for a while. The product settings are 

reset to the factory defaults.

BP68-00670A-00Eng_5.indd   90

2008-04-24   오후 3:20:26