Sanyo PDG-DXT10KL 사용자 설명서
5. Using On-Screen Display
80
Network Setting
See Network setting on page
82
.
Standby mode
There are two standby modes available: Normal and Power-saving. Power-saving mode allows you to put the projector in
the standby condition to consume less power than Normal.
the standby condition to consume less power than Normal.
Note:
Be sure to connect the projector and computer while the projector is in standby mode and before turning on
the computer.
Be sure to connect the projector and computer while the projector is in standby mode and before turning on
the computer.
Select from the following:
Normal
Power-saving
Note:
The HTTP server functions are not available during Power-saving mode.
The HTTP server functions are not available during Power-saving mode.
The MONITOR OUT function is not available during Power-saving mode.
Control through the PC Control connector and Network mode is not available during Power-saving mode.
For PC control and Network mode of the projector it is recommended to leave the projector in the Normal
mode.
For PC control and Network mode of the projector it is recommended to leave the projector in the Normal
mode.
Normal mode:
POWER indicator: Orange light
WARNING indicator: Green light
WARNING indicator: Green light
Power-saving mode:
POWER indicator: Orange light
WARNING indicator: Off
WARNING indicator: Off