Sim2 Multimedia NERO 3D-2 사용자 설명서
Note:
When viewing 3D contents, the PureMotion3D mode is automatically activated.
DynamicBlack (Nero 3D-2/ 3D HB)
This adjustement is available only on the Nero 3D-2 and Nero 3D HB.
DynamicBlack improves the level of black and increases the depth and the detail of
DynamicBlack improves the level of black and increases the depth and the detail of
the image especially in parts with low and medium brightness. It regulates light based
on the informative content of the image being projected. Available settings are Off,
on the informative content of the image being projected. Available settings are Off,
Video and Movie. Off is recommended when using test pattern for measurement or
calibration purposes.
PureMotion
Activates the motion estimation/motion compensation function, which suppresses
calibration purposes.
PureMotion
Activates the motion estimation/motion compensation function, which suppresses
motion judder. Settings available are Off, Low, Medium, or High. Default setting is
Low.
Low.
Image
This menu section provides access to some advanced image settings. Adjustments not
for details.
Table 4.4
Video
RGBS
YPrPb
RGB
Graphics HDMI 1/2
Aspect
●
●
●
●
Color Management
●
●
●
●
Gamma Correction
●
●
●
●
BrilliantColor
●
●
●
●
Overscan
●
●
●
Position
●
●
●
Frequency
●
●
Phase
●
●
Y/C Delay
●
Signal Range
●
1
Lamp Power
●
●
●
●
Notes:
1. when RGB or AVI infoframe missing or incomplete
Aspect
This adjustment changes the dimensions and aspect ratio (relationship between width
This adjustment changes the dimensions and aspect ratio (relationship between width
and height) of the displayed image. There are six default aspects available and three
user aspects (with user-settable parameters). You can select a different aspect for
user aspects (with user-settable parameters). You can select a different aspect for
each source: the selected aspect ratio will be automatically applied the next time the
relative source is displayed. You can also select the required aspect ratio from the re-
relative source is displayed. You can also select the required aspect ratio from the re-
mote control by repeatedly pressing
or by pressing
and one of the number
1-9. The following aspects are available:
4
Operation
Nero 3D
User Guide
26