Sterling XXX10-80 사용자 설명서
10-Pump, 80-Station Controller Chapter 4: Operation
52
The following table explains the status represented by each color at the Station Status screen.
Color Label
Description
Silver
Offline
Station is not enabled. The controller ignores any demands or
alarms.
alarms.
Blue
Ready
Station is enabled and idle (full).
Dark Yellow
Demand
Station requires material.
Light Green
Purging
The material line is being purged of material.
Brown
Dumping
The station is dumping material into its receiver.
White
Blow Back
Station’s air filter is being cleaned by blowing compressed air
backward through it.
backward through it.
Dark Grey
Bypass
Bypass switch at the station has been turned on, disabling the
station.
station.
Medium
Green
Green
Priority
Convey
Convey
Station is in priority convey mode. Its pump will be temporarily
dedicated to filling it as soon as possible.
dedicated to filling it as soon as possible.
Orange
Alarm
Station is in alarm.
Red
Critical
Station is in critical alarm. The controller has disabled the station
until the alarm is cleared.
until the alarm is cleared.
Purple Closed
Loop
Station is in closed loop convey.
Light Yellow
Waiting
Station is waiting for material to become available.
Dark Green
Convey
Station is being loaded.
Additional basic information about each station (convey time, dump delay, pump assignment,
and, if enabled, RPV setting, purge settings, etc.) is available at the Station n Operator screen.
See page 55 for details.
and, if enabled, RPV setting, purge settings, etc.) is available at the Station n Operator screen.
See page 55 for details.
Detailed configuration settings for each station are available at the Station n Setup screen. See
page 39 for details.
page 39 for details.
Reviewing Pump Status
The Pump Status screen is the counterpart of the Station Status screen. To reach the Pump
Status screen from any other screen:
The Pump Status screen is the counterpart of the Station Status screen. To reach the Pump
Status screen from any other screen:
1. Touch Pumps.
The Pump Status screen appears:
The status of each pump is color-coded, as summarized in the upper right of the screen.
You can see a more detailed explanation of each status by using the online help. To do so
from this screen:
from this screen: