Avaya S8100 사용자 설명서

Test alarm call out

To administer these numbers, follow these steps:

At the SAT type change system-parameters features and press RETURN. The Feature-Related 
System Parameters screen displays:

Go to page 4. In the Emergency Numbers – Internal field (optional) type a valid extension (up to 5 
digits).

In the Emergency Number – External field (required) type a 21-digit, dialpad-valid character 
string that can include trunk access codes. The default for this field is 911.

In the No-License Incoming Call Number field (optional) type a valid extension (up to 5 digits).

Press Enter to save the changes.

A mismatched or missing license file generates these alarms or signals:

Major alarm (LIC-ERR and NO-LIC) generated in the Hardware Error Log and Alarm Log (see 
Alarming strategy).

Warning message at SAT login (see Log in warning messages).

Lights an administered feature button (see Feature button assignments).

The following procedures are to be used to test alarming on S8100.

If testing remotely from the Technical Service Center (TSC), you must do the rasdrop 
command before doing any of the alarm tests. The rasdrop command forces a modem 
disconnect after 1 minute, and gives you time to execute the alarm test commands.

After each test has been run, the Field Services Organization (FSO) technician will have to go to the ART 
web site to verify each alarm has been received.

change system-parameters features           Page 

4 of 12

                        FEATURE-RELATED SYSTEM PARAMETERS

SYSTEM-WIDE PARAMETERS
                      Switch Name: Devo
     Emergency Numbers - Internal: XXXXXX External: XXXXXXXXXXXXXXXXXXXXX
  No-License Incoming Call Number: XXXXX

MALICIOUS CALL TRACE PARAMETERS
               Apply MCT Warning Tone? n   MCT Voice Recorder Trunk Group:

SEND ALL CALLS OPTIONS
            Send All Calls Applies to: station
        Auto Inspect on Send All Calls? n

UNIVERSAL CALL ID
      Create Universal Call ID (UCID)? n      UCID Network Node ID: