3D Connexion 7300 사용자 설명서

■

The printer is heavy, and must be lifted by three people. The illustration below shows the proper 
technique for lifting the printer. 

Do not use the Multi-Purpose Tray or Left Side Output Tray to lift the printer.

■

Follow the recommended procedure when moving the printer from one location to another. You 
can find this procedure in the Moving Guide printable page located in the Setup Guide o

n the 

■

Do not place any liquids on the printer.

Be careful when working in areas inside the printer identified with a warning symbol. These 
areas may be very hot and could cause personal injury.

■

Wait 10-15 seconds between switching the printer off and on.

■

Keep hands, hair, neckties, etc., away from the exit and feed rollers.

7300-53