Motorola Express Pager 사용자 설명서

3

Press 

[

 to turn your pager on. An alert indicator on the

upper left-hand corner indicates the pager is on and ready
to receive messages.

When the pager is on and no activity is taking place, the stand-
by screen is displayed. 

➊

To turn your pager off, press and release 

\

 until

pager off ?

 

is displayed.

➋

Press 

[

.

The time of day and the date are displayed on your pager
even when it is off.

➊

Press 

]

 at any time to turn the light on.

➋

Press 

]

 again while the clock or a message is dis-

played to turn the light off and return to the standby
screen.

E

11:28a 11-03

11:28a 11-03

4

➊

Press and release 

\

 until 

set time ?

 is displayed.

➋

Press 

[

. The hour digits begin to flash.

➌

Press and release 

\

 to set the correct hour digits.

➍

Press 

[

. The first digit of the minutes begins to flash.

➎

Press and release 

\

 

to set the correct minutes.

➏

Press 

[

 

again to move to the next minutes digit

.

➐

Press 

[

. The A.M./P.M. indicator begins to flash.

➑

Repeat steps 5 and 6 to set your pager for A.M./P.M.
and the 12/24 hour mode.

➒

Press 

]

 twice or allow the pager to automatically return

to the standby screen. The time and date are displayed.

Note: When adjusting any of the time and date fields, press
and hold the 

\

 to fast-forward to your selection. To skip a

field, press and release 

[

 until you reach the desired field.

For example, if you only need to change the 12 Hour setting,
press and release 

\

 until 

set time ?

 is displayed, then

press and release 

[

 until 

1

2 hours

 begins to flash.

After performing any pager functions described in this
manual, your ULTRA Express pager automatically returns
to the standby mode and your selections are activated; or
press 

]

 twice to return to the standby mode and activate

your selections.

E

11:28a

 

5

➊

Press and release 

\

 until 

set date ?

 is displayed.

➋

Press 

[

. The month digits begin to flash.

➌

Press 

\

 to set the correct month digits.

➍

Press 

[

. The day digits begin to flash.

➎

Press 

\

 to set the correct day digits.

➏

Press 

]

 twice or allow the pager to automatically return

to the standby screen. The time and date are displayed.

You can set your pager to alert with either a pleasing (au-
dible) alert or a vibrating (silent) alert.

➊

Press 

\

 until 

silent ?

 or 

audio ?

 is displayed

depending on which mode the pager is in currently. For
the pager to vibrate, it must be in the silent mode.

➋

To change the alert mode, press 

[

 while your choice

of alert mode is displayed.

The choices are 

E 

for audible or 

D 

for vibrate (silent).

You can set your ULTRA Express pager to alert with one
of four pleasing alerts or one standard alert.

Note: You must first set the incoming alert mode to “Audi-
ble”, see above.

➊

Press and release

 

\

 until 

set alert ?

 is dis-

played.

➋

Press 

[

. The current setting is displayed.

➌

Press and release 

\

 until your choice of ALERT 1,

ALERT 2, ALERT 3, ALERT 4 or ALERT 5 is displayed. 

➍

Press 

]

 twice or allow the pager to automatically re-

turn to the standby screen.

6

When a message is received, the pager alerts for 8 sec-
onds.

➊

Press any button to stop the alert.

➋

Press 

[

 to display the message.

➌

Press 

]

 twice while the message is displayed to re-

turn to the standby screen.

Messages containing more than 12 characters are dis-
played on a second screen. The 

I

 symbol indicates there

are additional screens. The second screen is displayed
automatically after 1 minute, or pressing 

[

 advances the

display to the second screen. The last screen of the mes-
sage displays the message number and time the mes-
sage was received.

If a message is left unread, the pager emits a reminder
alert every 2 minutes, and the number of unread messag-
es is displayed on the screen (i.e., 1 Page, 2 Pages).

You can protect up to eight messages so they are not
erased or replaced by new messages. The message you
want to protect/unprotect must be displayed on the
screen.

➊

To protect a message, press and release 

▲

 while the

message is displayed until 

protect ?

 is displayed.

➋

Press 

[

.

When reading a protected message, the protect 

F

 symbol

is displayed in the upper portion of the screen.

E 

              

I

555-1234