Motorola CM300d 사용자 설명서

This feature allows you to initiate a hands-free voice activated 
call on a programmed channel. Your radio automatically 
transmits, for a programmed period, whenever the microphone 
on the VOX-capable accessory detects voice. 

NOTE: You may need to turn off the radio and power it up 

again after detaching the VOX-capable microphone 
from it to allow the radio to switch to another valid 
accessory. The microphone source must be 
preconfigured and the VOX-capable accessory 
attached to the preconfigured port.

Pressing the PTT button during radio operation disables VOX. 
To re-enable VOX, do one of the following:

Turn the radio off and power it on again, OR

Change the channel via the Scroll Up/Down buttons, OR

Change the channel via the Channel Up/Down Button, OR

Follow the procedure below.

NOTE: Turning this feature on or off is limited to radios with 

this function enabled. Check with your dealer or system 
administrator for more information.

Procedure: 
Press the programmed VOX button to toggle the feature on or 
off.
OR
Follow the procedure below.

g 

  to access the menu.

b  

 or 

c 

   to Utilities and press 

g 

  to select.

b  

 or 

c 

   to Radio Settings and press 

g 

  to select.

b  

 or 

c 

   to VOX and press 

g 

  to select.

b  

 or 

c  

 to On to enable VOX. The display shows  

beside On.
OR

b  

 or 

c  

  to Off to disable VOX. The display shows  

beside Off.

If the Talk Permit Tone feature is enabled (see Turning the Talk 
Permit Tone On or Off on page 48), use a trigger word to 
initiate the call. Wait for the Talk Permit Tone to finish before 
speaking clearly into the microphone.

