Toshiba CIX-UG-STDTELVB 사용자 설명서

By dialing a Class of Service Override code, a user can change a station’s set of 
privileges to one associated with the override code. When the call is terminated and 
another is attempted from the same station, the original Class of Service is applied. 
This allows selected users to override restrictions that are placed on any telephone in 
the system.

ä

1. Access an outside line. You hear dial tone.

2. Press 

Flash

 + 

#471

. Dial tone stops.

3. Enter the Class of Service Override Code (four digits). You hear dial tone. For 

security reasons, the override codes are only available on a selected basis. See your 
CIX System Administrator.

4. Dial a telephone number.

This feature enables you to enter an established call on a line you share with another 
telephone. Up to two station users can enter an existing CO line-to-station call (i.e., up 
to three stations can be connected to a CO line). You can also use this feature if the 
station that is already connected to the CO line is in the Privacy Release mode. 

Station users with 

Privacy Release

 can allow stations with the shared button 

appearance to enter their conversations, even if the station entering the conversation is 
not programmed for Privacy Override. (see 

Station users can make page announcements to telephones and external speakers. 
Check with your CIX System Administrator to find out the zone numbers for various 
paging groups. 

ä

1. Lift the handset, and enter a paging access code.

2. Make your announcement, then hang up.