Cisco Systems 186 사용자 설명서
4-2
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
OL-3410-01
Chapter 4 Basic and Additional SIP Services
Important Basic SIP Services
Establishing Authentication
The Cisco ATA supports two levels of authentication, depending on the setting of the UseLoginID
parameter:
parameter:
•
If UseLoginID is set to 0, the user ID (UID0 or UID1) is used with a user-supplied password (PWD0
or PWD1) for authentication.
or PWD1) for authentication.
•
If UseLoginID is set to 1, you must supply a login ID (LoginID0 or LoginID1) and a password
(PWD0 or PWD1) for authentication.
(PWD0 or PWD1) for authentication.
Related Configuration Parameters
•
•
•
Table 4-1
Required SIP Parameters and Defaults
Parameter
Value Type
Description
Voice
Menu
Access
Code
Menu
Access
Code
Minimum
Value
Value
Maximum
Value
Value
Default
Integer
Seconds between registration renewal
203
1
86400
3600
Integer
Maximum number of times to try
redirection
redirection
202
0
10
5
Integer
Enable SIP registration
204
0
1
0
IP address
WAN address of the attached router/NAT;
currently only used to support SIP behind
a NAT.
currently only used to support SIP behind
a NAT.
200
0
255
0.0.0.0
Integer
Port to listen for incoming SIP requests
201
1
65535
5060
Integer
Base port to receive RTP media; only used
to support SIP behind a NAT
to support SIP behind a NAT
202
1
65535
16384
Alphanumeric
string
string
Proxy server for all outbound SIP requests.
All SIP requests are sent to
OutBoundProxy, when configured, instead
of to the configured GkOrProxy.
OutBoundProxy, when configured, instead
of to the configured GkOrProxy.
206
—
—
0
Alphanumeric
string
string
SIP proxy server address or registrar
address.
address.
5
—
—
0
Boolean
Set to 1 for SIP mode.
38
—
—
0
Boolean
Set to 0 after you have completed
configuration of the Cisco ATA. If this
value remains at 1, the Cisco ATA will
unnecessarily continue to contact the
TFTP server.
configuration of the Cisco ATA. If this
value remains at 1, the Cisco ATA will
unnecessarily continue to contact the
TFTP server.
80001
—
—
1