Midland Radio LXT500/535 사용자 설명서

LCD DISPLAY

1. LOW BATTERY ICON – Indicates the

battery level is low.

2. TRANSMIT (TX) ICON – Indicates

radio is transmitting a signal.

3. CHANNEL NUMBER – Changes from

1~22 on GMRS/FRS band.

4. KEY LOCK ICON – Indicates KEY

LOCK mode is on.

5. RECEIVE (RX) ICON – Indicates radio

is receiving a transmission.

6. TRANSMIT POWER LEVEL ICON –

Indicates TX Power setting (H/L).

7. PTT Button – Press and hold to trans-

mit voice communication.

8. ALL/LOCK Button – Press to send a

CALL Alert signal. Press and hold to

turn KEY LOCK on/off.

9. MIC – Built-in microphone.

10. SPEAKER – Built-in speaker.

11. ANTENNA

12. EXTERNAL SPEAKER/MIC/CHG.

JACK

13. POWER / MENU Button – Press and

hold for at least 3 seconds to turn the

radio on/off. Press momentarily to

access Menu mode.

14. SCAN Button – Press to enter SCAN

mode.

15. UP▲andDOWN▼Buttons–Make

adjustments in MENU mode.

BATTERY INSTALLATION

Your LXT500/535 Series radio operates with either a NiMH battery pack

or optional 4 “AAA” alkaline batteries. The belt clip should be removed

to ease installation or removal of the batteries.

To install the batteries:

1. With the back of the radio facing you, remove the belt clip (see diagram

on next page) for easy access, then remove the Battery Cover by press-

ing down on the top center and sliding it down from the radio.

2. Insert 4 “AAA” batteries observing the polarity as shown. Installing

the batteries incorrectly will prevent the unit from operating or may

damage the unit.

3. Return the Battery Cover by sliding it up on the radio. Replace the

belt clip, making sure it locks into place.

CONTROLS