Kenwood TK-3130 사용자 설명서
25
C
ALL
A
LERT
It is also possible to set up your transceiver so that you are
alerted using vibration. When vibration alert is activated, the
vibration icon appears on the display.
alerted using vibration. When vibration alert is activated, the
vibration icon appears on the display.
To select your received alert tone method:
1
Turn the transceiver power OFF.
2
Press and hold the MENU key while turning the
transceiver power ON (for 1 second).
transceiver power ON (for 1 second).
3
Press the
▲
or
▼
key to select “Ct”.
4
Press the MENU key to select “Ct-1” (normal alert tone
sounds), “Ct-2” (you are alerted by vibration), “Ct-OF” (no
alert tone or vibration), or “Ct-3” (you are alerted by both
the tone and vibration).
sounds), “Ct-2” (you are alerted by vibration), “Ct-OF” (no
alert tone or vibration), or “Ct-3” (you are alerted by both
the tone and vibration).
5
Press the PTT, MON, or CAL key to exit Menu Mode.
Note: If you use alert tone and/or vibration, you must set a QT tone
or a DQT code (page 11).
or a DQT code (page 11).