Motorola RMM2050 사용자 설명서

English

For the following explanations, refer to “Parts 
Of The Radio” on page 10.

TURNING RADIO ON/OFF 
To turn ON the radio, rotate the On/Off/Volume 
Knob clockwise. The radio plays one of the 
following:

•

Power up tone and channel number 
announcement, or

•

Battery level and channel number 
announcements, or

•

Silent (Audible tones disabled)

The LED blinks red briefly.

To turn the radio OFF, rotate the On/Off/Volume 
Knob counterclockwise until you hear a ‘click’ 
and the radio LED Indicator turns OFF.

ADJUSTING VOLUME 
Turn the On/Off/Volume Knob clockwise to 
increase the volume, or counterclockwise to 
decrease the volume.

Do not hold the radio too close to the ear 
when the volume is high or when adjusting 
the volume

SELECTING A CHANNEL 
To select a channel, press the SB2 button until 
you reach the desired channel. An audible 
voice indicates the selected channel. 

Each channel has its own Frequency, 
Interference Eliminator Code and Scan 
Settings.

TALKING AND MONITORING 
It is important to monitor for traffic before 
transmitting to avoid ‘talking over’ someone 
who is already transmitting

To monitor, long press and hold the SB1(*) 
button to access channel traffic. If no activity is 
present, you will hear ‘static’. To release, press 
SB1 again. Once channel traffic has cleared, 
proceed with your call by pressing the PTT 
button. When transmitting, the LED Indicator 
stays solid red.