Motorola RMM2050 사용자 설명서

English

The sensitivity of the radio's accessory or 
microphone can be adjusted to suit different 
operating environments. VOX sensitivity can 
be programmed via the CPS. 

Default value is OFF. If you want to use the 
VOX feature, VOX level should be set at a 
value different from OFF.

•

1 = High audio input levels trigger the Tx

•

2 = Medium sensitivity

•

3 = Low audio input levels trigger the Tx

The sensitivity of the microphone can be 
adjusted to fit different users or operating 
environments.

This feature can be adjusted only through the 
CPS. Microphone default setting is set to level 
2 (medium gain).

•

Enable iVOX by pressing the PTT button while 

turning ON the radio.

•

Pressing the PTT button can temporarily disable 
the iVOX operation.

There is a short delay between the time 
when you start stalking and when the radio 
transmits.

To enable/disable power up tone mode, press 
SB1 and SB2 buttons simultaneously for 2-3 
seconds while powering up the radio until you 
hear a quick succession of beeps and an 
audible voice announcement.

Reset to Factory Defaults will set back all radio 
features to the original factory default settings. 
To do so, press PTT, SB2 and SB1 
simultaneously while turning ON the radio until 
you hear a high tone chirp.