Motorola xpr6350 사용자 설명서
Prep
aring Y
o
ur Radio for Use
English
4
Press downward on the cover to seat the lower tab properly into
the RF connector.
the RF connector.
Turn the thumbscrew clockwise to secure the connector cover
to the radio.
to the radio.
To remove the universal connector cover, press down on the
cover and turn the thumbscrew counterclockwise. Lift the cover
up, slide the connector cover loop upwards, and remove it from
the attached antenna.
cover and turn the thumbscrew counterclockwise. Lift the cover
up, slide the connector cover loop upwards, and remove it from
the attached antenna.
Powering Up the Radio
Rotate the On/Off/Volume
Control Knob clockwise
until you hear a click. The
LED blinks green.
Control Knob clockwise
until you hear a click. The
LED blinks green.
A brief tone sounds,
indicating that the power up
test is successful.
indicating that the power up
test is successful.
NOTE: There is no power up
tone if the radio
tones/alerts
function is disabled
(see Turning
Radio Tones/
Alerts On or Off on
page 24).
tones/alerts
function is disabled
(see Turning
Radio Tones/
Alerts On or Off on
page 24).
If your radio does not power up, check your battery. Make sure
that it is charged and properly attached. If your radio still does
not power up, contact your dealer.
that it is charged and properly attached. If your radio still does
not power up, contact your dealer.
To turn off the radio, rotate this knob counterclockwise until you
hear a click.
hear a click.
Adjusting the Volume
To increase the
volume, turn the On/
Off/Volume Control
Knob clockwise.
volume, turn the On/
Off/Volume Control
Knob clockwise.
To decrease the
volume, turn this knob
counterclockwise.
volume, turn this knob
counterclockwise.
NAG-LACR-EMEA.book Page 4 Wednesday, April 30, 2008 5:11 PM