Shoprider WS 888WS 사용자 설명서

 

4/27/2006 

11

1. On-Off Button:  This button turns 
the joystick controller (hereinafter 
referred to as VR2) on and off.  Do 
not use this button to stop the power 
chair, except in an emergency 

2. Battery Gauge: 

This is a 10-

segment display, which indicates if 
the VR2 is switched on and gives 
the state of charge of the battery. 
Additionally, any faults in the 
Powerchair electrical system are 
also indicated by this display.  Refer 
to Table 1 for more details. 
3. Maximum Speed Indicator: This 
is a 5-segment display, which 
indicates the maximum speed 
setting selected. 
4. Horn Button: This button 
operates the Powerchair’s horn. 
5. Speed Decrease Button: This Button Increases the maximum speed. 
6. Speed Increase Button: This Button Increases the maximum speed. 
7. Joystick: This controls the speed and direction of the Powerchair. 
Push the joystick in the direction you want to go.  The further you push it, 
the faster the speed will be.  Releasing the joystick will automatically 
engage the brakes and stop the Powerchair. 
8. Charging Port: This is the only charging port for the Shoprider HD.
When using this charging port only plug  into  this  port  with the qualified
Shoprider charger certified by the original manufacturer of the 
Powerchair.  This port should not be used as a power supply for any other 
electrical devices.  Doing either of these as stated above will void the 
warranty of the Powerchair. 
 
Note: The controller can be fitted to suit either right or left-handed users.
Please contact your provider for further assistance. 
 

1 

2 

4 

3 

7 

6 

5 

8

Figure 4