Pride Mobility 1170XL 사용자 설명서

24

www.pridemobility.com

Jazzy 1170 XL Plus Series

1. Lift the armrest straight up so that it is perpendicu-

lar to the floor. See figure 13.

2. Loosen the jam nut.

3. Turn the adjusting screw to raise or lower the front

of the armrest.

4. Tighten the jam nut to lock the adjusting screw into

place.

Controller Position
You can move the controller in toward or out away

from the armrest, or change the position of the control-

ler for either left-hand or right-hand use. See figure 13.

1. Flip up the armrest so it is perpendicular to the

floor.

2. Loosen the setscrew on the controller bracket. See

3. Slide the controller into or out of the armrest to the

desired position.

4. Tighten the setscrew to secure the controller.

1. Turn off power to the controller.

2. Disconnect the controller from the power base.

3. Cut the wire tie(s) securing the controller harness

to the armrest.

4. Flip up the armrest so it is perpendicular to the

floor.

5. Loosen the setscrew on the controller bracket. See

6. Slide the controller out of the armrest.

7. Loosen the setscrew in the other armrest.

8. Place the controller in the other armrest.

9. Tighten the setscrew to secure the controller.

10. Route the controller harness so that it cannot be

pinched in the seat hinge.

11. Use wire ties to secure the controller harness to the

armrest. See figure 10.

12. Plug the controller into the power base. See