Maxon Telecom WL7-VERS. C-1K 사용자 설명서

 

24

11921 Slauson 

A

ve.  Santa Fe Springs, CA.  90670  (800) 227-41

16  F

AX (888) 771-7713

9. Check under the vehicle fl oor for possible in-

terference between the Lift base plate mount-
ing bolts and the vehicle underbody. For 
example, check subframe members, wiring 
harnesses, cables, and fl uid lines.

7. Remove lifting device and close wheelchair door. 

Enter the vehicle. Verify the wheelchair door 
closes correctly and the minimum clearance is 
3/4”. If door will not close correctly, reposition the 
Lift.

5. Using an appropriate lifting device that 

can safely lift 500 pounds, raise Lift to the 
wheelchair doorway. Place the Lift inside 
doorway (FIG. 24-1). Align outboard 
edge of Lift threshold plate parallel with 
outboard edge of doorway. The decal on 
the underside of the Lift platform must 
face outboard (FIG. 24-1).

8. Secure vehicle door wide open (FIG. 24-1).

6. Position the Lift according to the clearance di-

mensions given in VEHICLE REQUIREMENTS 
section in this Installation Manual.

 

You may use a template instead of the 

            Lift for positioning the Lift on vehicle. To 
            use a template, refer to USING TEM
            PLATE TO POSITION LIFT section in 
            this Installation Manual.