Maxon Telecom WL7-VERS. C-1K 사용자 설명서
PATENTS PENDING
39
11921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
CHECKING HYDRAULIC FLUID LEVEL
CAUTION
Keep dirt, water and other contaminants from entering the hydraulic sys-
tem. Before opening the hydraulic fl uid reservoir fi ller cap, drain plug and
hydraulic lines, wipe off contaminants that can get in the openings. Also,
protect the openings from accidental contamination.
tem. Before opening the hydraulic fl uid reservoir fi ller cap, drain plug and
hydraulic lines, wipe off contaminants that can get in the openings. Also,
protect the openings from accidental contamination.
2. If needed, add fl uid to the reservoir
as follows. Unbolt the pump cover as
shown in FIG. 39-2.
shown in FIG. 39-2.
1. Check the hydraulic fl uid level in reservoir as
follows. With Lift in STOWED position, fl uid
level should be as shown in FIG. 39-1.
level should be as shown in FIG. 39-1.
UNBOLTING/BOLTING PUMP COVER
(LH PUMP SHOWN)
FIG. 39-2
INSPECTION
SLOT
RESERVOIR
HYDRAULIC FLUID LEVEL
(LH PUMP SHOWN)
FIG. 39-1
2”
PUMP
COVER
SCREWS
PUMP COVER
!