Haier L19C11W 사용자 설명서

You can use the number keys on the remote control to directly select TV 
channels.
The LCD-TV can store up to 100 channels , and you can press the keys on the 
remote control or on the panel to make a selection.

1. if you want to choose any channel from 0 to 9, please press the -/--

button   

    Until 

 is indicated on the screen and then press the relevant key on the 

    remote control.

for example: if you want to choose channel 8, just press the

    Key number 8.
2.If you want to choose a channel bigger than 9, please press the -/--

button        

  until 

 is indicated on the screen. Enter the two digits of the channel  

    number you want to watch..

for example: select channel 16

Note: if you want to choose one digit channel in this condition, you should press 
0 first and then one digit number key.

Press P.STD button on the remote control for menu display . For desired mode as
follows:

PERSONAL

 STANDARD  MILD

FRESH

1 

2 

3 

Suppose the channel number you used just now is 8 and the channel number you 

are using is 18 (as shown in the figure).

If you want to return to the last watched program channel 8, you can simply press  the 

SWAP button.

If you want to return to channel 18, press the button again. Through this function, you 

can easily change between the channel you are using and the channel you used last time. 

1 Press the SCAN button to scan through all the memorized TV channels. The scan will 
pause for about 2 seconds on each channel.
2 If you want to stop the function during auto scanning, simply press the SCAN  button 
again.