Motorola MC68HC908MR32 사용자 설명서
Input/Output (I/O) Ports
Port E
MC68HC908MR16/MC68HC908MR32 — Rev. 4.0
Advance Information
MOTOROLA
Input/Output (I/O) Ports
317
15.7 Port E
Port E is an 8-bit, special function port that shares five of its pins with the
timer interface module (TIM) and two of its pins with the serial
communications interface module (SCI).
timer interface module (TIM) and two of its pins with the serial
communications interface module (SCI).
15.7.1 Port E Data Register
The port E data register (PTE) contains a data latch for each of the eight
port E pins.
port E pins.
PTE[7:0] — Port E Data Bits
PTE[7:0] are read/write, software-programmable bits. Data direction
of each port E pin is under the control of the corresponding bit in data
direction register E.
of each port E pin is under the control of the corresponding bit in data
direction register E.
NOTE:
Data direction register E (DDRE) does not affect the data direction of
port E pins that are being used by the TIMA or TIMB. However, the
DDRE bits always determine whether reading port E returns the states
of the latches or the states of the pins.
port E pins that are being used by the TIMA or TIMB. However, the
DDRE bits always determine whether reading port E returns the states
of the latches or the states of the pins.
Address:
$0008
Bit 7
6
5
4
3
2
1
Bit 0
Read:
PTE7
PTE6
PTE5
PTE4
PTE3
PTE2
PTE1
PTE0
Write:
Reset:
Unaffected by reset
Figure 15-13. Port E Data Register (PTE)