Soehnle 3011 사용자 설명서

4.Y-8328

Operating Manual

Operating Manual 3011

3011

Operating Manual Digital Indicator 3011

Version V0.1

Stand: 06.09.07

Page 4 of 8

Subject to technical modifications. Drafts are protected according to §823 BGB: Copy, duplication or circulation only with explicit approval.

Soehnle Professional GmbH

Soehnle Professional GmbH & Co. KG

& Co. KG

& Co. KG | P.O. Box 1308 | D-71536 Murrhardt | Telephone +49 (0) 7192 / 9319 – 0 | E-Mail info@soehnle-professional.com

www.soehnle-professional.com

SWITCH On/Off Type 3011

• Switch the indicator on/off via the ON/OFF key.

• While switching on, the scale is zeroed. If the scale is switched on outside the zero range

at power-on, the scale indicates an error message:

_0_ = Measuring value below zero limit
_ _

0 = Measuring value above zero limit

The application is switched off to avoid the cause for under/overload before the next
switch on. The zero range at power-on can be skipped by pressing the zero key during
the switch on routine. The last saved zero point is accepted.
The active measuring point is indicated as flag on the display. Switchover to another
measuring point is realised by pressing the Info and Print key on the keyboard.

• Zero range limits at power-on:

Approvable: Zero range at power-on 20% of maximum, default –5% to +15% of maximum
Non-approvable: Zero range at power-on –99% to +99% of maximum

• Behaviour at power failure: the scale returns in the last saved state.

• At power-on (warm or cold starting), the last used program is activated.