StarTech.com VGA2NTSCPRO 사용자 설명서

Instruction Manual

6

If you are experiencing any difficulties with your converter, first make sure that all 

cables are firmly seated and connected to their proper ports.

•  Make sure the power is turned on. Your computer screen will still have a display 

even if the converter is turned off, but you will not have a display on the TV unless 

the converter is powered on.

•  Make sure that your television is on the proper “Video Input” channel. Consult the 

television manufacturer’s documentation if necessary.

•  Make sure that your 15-pin VGA extender cable is attached to the proper ports. 
•  Make sure the Video/RGB and NTSC/PAL settings on the converter are correct. 

Consult your television manufacturer’s documentation for details on your 

television’s settings.

•  If you are connecting from a notebook computer, make sure that the CRT output on 

your notebook is enabled.

•  Make sure the NTSC/PAL setting on the converter is correct. Consult your television 

manufacturer’s documentation for details on your television’s settings.

•  Make sure the color or saturation setting on your TV is not minimized. There is a line 

flicker on the TV.

•  Adjust the Sharpness settings to find an appropriate level for your system. My TV 

doesn’t have an extra video input connector.

•  You may need to purchase a special RF Modulator. This device can convert the 

composite video signal of the converter into an antenna signal that can be read by 

many older televisions.