LevelOne PPM-1000 552030 전단

www.level1.com  

I

  one world_one brand_one level_

PoE PD/PSE/Repeaters



All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice. 

 

© Copyright Digital Data Communications GmbH. All Rights Reserved. 

Top Side: 4 x Push Terminals connectors to fix bare wire

Front Side: 1 x Network UTP port to measure power status

Status or result is shown by the LED indicators below with 

different colors

PWR / SYS: Power status / Test and system status

PASS / FAIL: Test result of each test

WATT / VOL: States of measured power consumption (watt) or 

voltage. Please watch the reading of measured temperature by 

reading in LED display or the device is overheated.

Temp / Over Temp: State of measured temperature by reading 

in LED display or the device is overheated

3 digits LED display: Show the measured voltage, watt or 

temperature inside the device.

Start / Stop: Start / Stop to measure maximum available power 

(watt) and Voltage

Function mode: Switch around different power unit and its 

state is presented by LED indicator

Voltage LED state: Current unit is Voltage; watch the voltage 

reading on LED display panel

Watt LED state: Current unit is Watt, watch the watt reading on 

LED display panel

Temperature LED state: Current unit is temperature, watch the 

temperature reading on LED display panel

Able to mount external battery pack to PPM-1000 for on-site 

test without power supply

USB port of both PPM-1000 and battery pack are all for power 

supply or charge purpose without data link to PC

Operating: 0%~85%RH

Storage: 0%~85%RH

95 mm x 76.6mm x 19.6 mm

PoE Power Measurement

PPM-1000 x1

 

 

 

Min USB Adapter x1

 

 

 

External Li-ON Battery x1

 

 

 

Universal Travel adapter x1

 

 

 

Console cable x1

 

 

 

Neck Strap x 1

 

 

 

User Manual x1

PoE Ethernet Switch

V1.0

IP Phone

IP Camera

Public Wireless AP