DB ELETTRONICA TELECOMUNICAZIONI S.P.A. MOZART500 사용자 매뉴얼

차례

• GENERAL INFORMATION

  8
• SAFETY NOTICES

  8
• FIRST AID IN CASE OF ELECTROCUTION

  9
• WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

  10
• MANUFACTURE LABELS

  10
• IC RSS-GEN, SEC 7.1.2 WARNING STATEMENT- (REQUIRED FOR TRANSMITTERS)

  11
• IC RSS-102, SEC 2.6 WARNING STATEMENTS

  11
• FM EXCITER GENERAL DESCRIPTION

  12
• TECHNICAL SPECIFICATIONS

  18
• INSTALLATION AND ACTIVATION

  21
• INITIAL CHECK

  21
• CONNECTIONS

  22
• MENU DESCRIPTION

  23
• 5.1 VISUALIZATION

  23
• 5.1.1 START PAGE

  23
• 5.1.2 Main menu

  23
• 5.2 VMETERS AND INFO MENU

  24
• 5.2.1 Output Modulation

  25
• 5.2.2 Left and Right channels level

  25
• 5.2.3 AES-EBU Left and Right channels level

  25
• 5.2.4 Auxiliary channels level

  26
• 5.2.5 Voltages and current

  26
• 5.2.6 Heatsink temperature

  27
• 5.2.7 Device information

  27
• 5.3 SETTINGS MENU

  28
• 5.3.1 Frequency Set menu

  29
• 5.3.2 Power Set menu

  29
• 5.3.3 Operative Mode menu

  30
• 5.3.4 Audio Selection menu

  32
• 5.3.5 Sensitivity menu

  35
• 5.3.6 Presetting menu

  36
• 5.3.7 Alarms menu

  43
• 5.3.8 Memory menu

  49
• 5.3.9 History menu

  53
• Generals menu

  55
• FRONT PANEL

  59
• 6.1 FRONT PANEL KEYS

  59
• 6.2 FRONT PANEL LEDS

  61
• 6.2.1 Status leds

  61
• 6.2.2 Audio leds

  62
• 6.2.3 Control leds

  63
• 6.2.4 Command leds

  64
• REMOTE I/O (OPTIONAL)

  65
• WEB SERVER (OPTIONAL)

  66
• 8.1 WEB PAGES

  67
• 8.1.1 Main page

  67
• 8.1.2 Login page

  68
• 8.1.3 Settings page

  69
• 8.1.4 Presettings page

  70
• 8.1.5 Log page

  71
• 8.1.6 Administration page

  72
• 8.1.7 Modulator Upgrade page

  74
• 8.1.8 Webserver Upgrade page

  75
• 8.2 UPGRADING PROCEDURES

  76
• 8.2.1 Upgrading the modulator firmware

  76
• 8.2.2 Upgrading the webserver board firmware

  80
• 8.3 SNMP PROTOCOL

  84
• 8.3.1 Management Information Base MIB

  84
• 8.3.2 Message trap and inform

  86
• 8.3.3 Commands and State

  87
• FIG. 1.1 - UNITS LABEL

  10
• FIG. 2.1 - MOZART 30 FRONT VIEW

  14
• FIG. 2.2 - MOZART 30 REAR VIEW

  15
• FIG. 2.3 – MOZART 50/120/300/500/1000 FRONT VIEW

  16
• FIG. 2.4 – MOZART 50/120/300/500/1000 REAR VIEW

  17
• FIG. 5.1 – START PAGE

  23
• FIG. 5.2 – MAIN MENU

  23
• FIG. 5.3 – VMETERS AND INFO MENUS FLOW GRAPH

  24
• FIG. 5.4 – OUTPUT TOTAL MODULATION PAGE

  25
• FIG. 5.5 – ANALOGIC LEFT AND RIGHT INPUT LEVELS

  25
• FIG. 5.6 – AES-EBU LEFT AND RIGHT INPUT LEVELS

  25
• FIG. 5.7 – AUXILIARY CHANNELS 1 INPUT LEVELS

  26
• FIG. 5.8 – AUXILIARY CHANNELS 2 INPUT LEVELS

  26
• FIG. 5.9 – VOLTAGES AND CURRENT PAGE

  26
• FIG. 5.10 – HEATSINK TEMPERATURE PAGE

  27
• FIG. 5.11 – DEVICE INFORMATION PAGE

  27
• FIG. 5.12 – SETTING MENU FLOW GRAPH

  28
• FIG. 5.13 – SET FREQUENCY MENU

  29
• FIG. 5.14 – SET POWER MENU

  29
• FIG. 5.15 – OPERATIVE MODE MONO

  30
• FIG. 5.16 – OPERATIVE MODE MONO CHANNEL SELECTION

  30
• FIG. 5.17 – OPERATIVE MODE STEREO OPTIONS

  31
• FIG. 5.18 – OPERATIVE MODE STEREO MPX

  31
• FIG. 5.19 – AUXILIARY CHANNELS OPTIONS

  32
• FIG. 5.20 – AUDIO SELECTION MENU OPTIONS

  32
• FIG. 5.21 – INPUT IMPEDANCE MENU

  33
• FIG. 5.22 – PRE-EMPHASIS MENU

  33
• FIG. 5.23 – ENABLE LIMITER MENU

  34
• FIG. 5.24 – LIMITER VALUE MENU

  34
• FIG. 5.25 – CHANNELS SENSITIVITY

  35
• FIG. 5.26 – PRESETTING MODE

  36
• FIG. 5.27 – PRESETTING MONO MODE MENU

  37
• FIG. 5.28 – PRESETTING STEREO MPX INT MODE MENU

  38
• FIG. 5.29 – PRESETTING TOTAL DEVIATION ADJUSTMENT

  39
• FIG. 5.30 – PRESETTING AUXILIARY CHANNELS DEVIATION ADJUSTMENT

  39
• FIG. 5.31 – PRESETTING 19KHZ/MPX OUT MENU

  40
• FIG. 5.32 – PILOT TONE DEVIATION ADJUSTMENT

  40
• FIG. 5.33 – PILOT TONE PHASE ADJUSTMENT

  41
• FIG. 5.34 – AES-EBU INTERFACE ENABLE MENU

  41
• FIG. 5.35 – AES-EBU RATIO MENU

  42
• FIG. 5.36 – ALARMS/WARNINGS MENU FLOW GRAPH

  43
• FIG. 5.37 – FOLDBACK REFLECTED MENU

  44
• FIG. 5.38 – WARNING REFLECTED MENU

  44
• FIG. 5.39 – WARNING POWER LOW MENU

  45
• FIG. 5.40 – ALARM POWER LOW MENU

  46
• FIG. 5.41 – AUDIO LOW LEVEL MENU

  46
• FIG. 5.42 – AUDIO LOW TIMEOUT MENUS

  47
• FIG. 5.43 – AUDIO OVER LEVEL MENU

  47
• FIG. 5.44 – AUDIO OVER TIMEOUT MENUS

  48
• FIG. 5.45 – AUDIO EVENTS TYPE MENU

  48
• FIG. 5.46 – MEMORY MENU FLOW GRAPH

  49
• FIG. 5.47 – ACTIVE MEMORY MENU

  50
• FIG. 5.48 – EDIT MEMORY MENUS

  50
• FIG. 5.49 – ENABLE MEMORY EDITING PAGE

  51
• FIG. 5.50 – ENDING EDITING MEMORY PAGE

  51
• FIG. 5.51 - MEMORY MENU DURING EDITING

  51
• FIG. 5.52 – CONFIRMATION EDITING MEMORY PAGE

  51
• FIG. 5.53 – CLEAR ALL MEMORY MENU

  52
• FIG. 5.54 – CLEAR ALL MEMORY CONFIRMATION PAGE

  52
• FIG. 5.55 – HISTORY MENU

  53
• FIG. 5.56 – HISTORY MENU EVENT DETAIL PAGE

  53
• FIG. 5.57 – GENERALS MENU FLOW GRAPH

  55
• FIG. 5.58 – SET HOUR PAGE

  56
• FIG. 5.59 – SET MINUTE PAGE

  56
• FIG. 5.60 – SET SECOND PAGE

  56
• FIG. 5.61 – SET DAY PAGE

  57
• FIG. 5.62 – SET MONTH PAGE

  57
• FIG. 5.63 – SET YEAR PAGE

  57
• FIG. 5.64 – SET RS-485 ADDRESS PAGE

  58
• FIG. 5.65 – UNIT IP ADDRESS PAGE

  58
• FIG. 5.66 – UNIT NETMASK PAGE

  58
• FIG. 8.1 – WEBSERVER MAIN PAGE

  67
• FIG. 8.2 – WEBSERVER LOGIN PAGE

  68
• FIG. 8.3 – WEBSERVER SETTING PAGE

  69
• FIG. 8.4 – WEBSERVER PRESETTING PAGE

  70
• FIG. 8.5 – WEBSERVER LOG PAGE

  71
• FIG. 8.6 – WEBSERVER ADMINISTRATION PAGE

  72
• FIG. 8.7 – WEBSERVER MODULATOR UPGRADE PAGE

  74
• FIG. 8.8 – WEBSERVER UPGRADE PAGE

  75
• FIG. 8.9 – START IN BOOTLOADER MODE

  76
• FIG. 8.10 – MODULATOR UPGRADE PAGE

  76
• FIG. 8.11 – NEW FIRMWARE SELECTION

  77
• FIG. 8.12 – UPLOAD THE NEW FIRMWARE

  77
• FIG. 8.13 – CONFIRM THE UPLOAD

  77
• FIG. 8.14 – UPGRADE TO THE NEW FIRMWARE

  78
• FIG. 8.15 – ERASE THE FLASH BEFORE THE UPGRADE

  78
• FIG. 8.16 – UPGRADE IN WORKING

  78
• FIG. 8.17 – UPGRADE COMPLETE

  79
• FIG. 8.18 – WEBSERVER UPGRADE PAGE

  80
• FIG. 8.19 – SELECT THE NEW WEBSERVER BOARD FIRMWARE

  80
• FIG. 8.20 – UPLOAD THE FIRMWARE TO WEBSERVER

  81
• FIG. 8.21 – CONFIRM THE UPLOADING

  81
• FIG. 8.22 – BUSY STATE DURING UPLOAD PROCEDURE

  81
• FIG. 8.23 – NEW FIRMWARE READY TO UPGRADE

  82
• FIG. 8.24 – CONFIRMATIONS TO UPGRADE

  82
• FIG. 8.25 – UPGRADE IN WORKING

  82
• FIG. 8.26 – REBOOT THE WEBSERVER

  83
• FIG. 8.27 – CONFIRM THE REBOOT

  83
• FIG. 8.28 – WAIT UNTIL THE REBOOT IS COMPLETED

  83
• FIG. 8.29 – LIST OF FILE OF MIB PACKET

  84
• FIG. 8.30 – FM SINGLE TRANSMITTER MIB

  85
• FIG. 8.31 - TRAPS AND INFORMS CONFIGURATION

  86
• TABLE 5.1 – FREQUENCY PERMITTED VALUES

  29
• TABLE 5.2 – SETTING POWER SPECIFICS

  30
• TABLE 5.3 – IMPEDANCE PERMITTED VALUES

  33
• TABLE 5.4 – PRE-EMPHASIS PERMITTED VALUES

  33
• TABLE 5.5 – LIMITER PERMITTED VALUES

  34
• TABLE 5.6 – SENSITIVITY PERMITTED VALUES

  35
• TABLE 5.7 - PRESETTING STEREO MPX EXT MODE MENU

  38
• TABLE 5.8 – TOTAL DEVIATION ADJUSTMENT PERMITTED VALUES

  39
• TABLE 5.9 – AUXILIARY CHANNELS DEVIATION ADJUSTMENT PERMITTED VALUE

  39
• TABLE 5.10 – PILOT TONE DEVIATION ADJUSTMENT PERMITTED VALUES

  40
• TABLE 5.11 – PILOT TONE PHASE ADJUSTMENT PERMITTED VALUES

  41
• TABLE 5.12 – AES-EBU RATIO PERMITTED VALUES

  42
• TABLE 5.13 – FOLDBACK REFLECTED PERMITTED VALUES

  44
• TABLE 5.14 – WARNING REFLECTED PERMITTED VALUES

  45
• TABLE 5.15 – WARNING POWER LOW PERMITTED VALUES

  45
• TABLE 5.16 – ALARM POWER LOW PERMITTED VALUES

  46
• TABLE 5.17 – AUDIO LOW LEVEL PERMITTED VALUES

  47
• TABLE 5.18 – AUDIO LOW TIMEOUTS PERMITTED VALUES

  47
• TABLE 5.19 – AUDIO OVER LEVEL PERMITTED VALUES

  48
• TABLE 5.20 – AUDIO OVER TIMEOUTS PERMITTED VALUES

  48
• TABLE 5.21 – AUDIO EVENTS PERMITTED TYPES

  49
• TABLE 5.22 – MEMORY AVAILABLE

  50
• TABLE 5.23 – EVENTS LIST

  54
• TABLE 7.1 – REMOTE I/O PINOUT

  65
• TABLE 8.1 – TRAPS AND INFORMS AVAILABLE

  86