사용자 설명서차례2 Safety2i2Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact carrier/dealer for further instruction.22.1 Intended Use2The Invacare Matrx Flo-tech cushion is designed to provide the highest level of skin protection for users with high risk of skin breakdown.22.2 General Warnings2m2warning2DO NOT USE THIS PRODUCT OR ANY AVAILABLE OPTIONAL EQUIPMENT WITHOUT FIRST COMPLETELY READING AND UNDERSTANDING THESE INSTRUCTIONS AND ANY ADDITIONAL INSTRUCTIONAL MATERIAL SUCH AS OWNER’S MANUALS, SERVICE MANUALS OR INSTRUCTION SHEETS SUPPLIED WITH...2accessories warning2Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.2installation warning2After any adjustments, repair or service and before use, make sure that all attaching component parts are secure.2Ensure the seat cushion is properly secured to the wheelchair before using. Otherwise injury or damage may occur.2Installing a cushion on a wheelchair may affect the center of gravity of the wheelchair and may cause the wheelchair to become unstable, potentially resulting in injury.2warning2Skin condition should be checked very frequently after the installation of any new seating system.2Your therapist and physician should be consulted if you have any questions regarding individual limitations and needs.2Working with your therapist, physician, and equipment supplier is the best way to assure that a seating choice matches your individual needs.2As the needs of the individual become more complex, the seating evaluation becomes more important.2The cushion is designed to be used only at room temperature. If it is left at lower temperatures, always allow it to warm to room temperature before using. Sitting on extremely cold or hot surfaces can cause skin damage.2Avoid sharp objects or exposure to excessive heat or open flame.22.3 Weight Limitation and Model Numbers2i2Refer to the chart for the weight limitation and stock model numbers.2Configured model numbers are: FT2Grey = size not available2width3depth3weight limit*314 in (36 cm)316 IN (41 CM)317 IN (43 CM)318 in (46 cm)319 IN (48 CM)320 IN (51 CM)321 IN (53 CM)322 IN (56 CM)33 Usage3i3Avoid the use of additional covers or padding between the user and the cushion, as this could reduce its effectiveness.33.1 Installing the Invacare Matrx Flo-tech31. Position the cushion so the material identification tags (not shown) face the rear.32. Align the hook and loop strips (not shown) on the bottom of the cushion with those on the wheelchair seat.33. Position the cushion onto the wheelchair as far back as possible.34. Press down to ensure the hook and loop strips are firmly engaged.34 Care and Maintenance34.1 Cleaning3m3caution3DO NOT use cleaning agents containing phenols or alcohols. Otherwise product damage may occur.3Outer Cover3The cover can be wiped clean with a damp towel.The cover can be removed for laundering. Unzip the cover and carefully remove the foam with inner liner. Machine wash in warm water and hang dry. Dry completely before reinstalling the outer cover .3Inner Liner3The inner liner should not be removed from the foam.34.2 Inspection3m3warning3DO NOT continue to use this product if problems are discovered. Corrective maintenance can be performed at or arranged through your equipment supplier.3Visually inspect parts including upholstery materials, foams (if accessible), and plastics, for deformation, corrosion, breakage, wear or compression.3크기: 238킬로바이트페이지: 4Language: English매뉴얼 열기