사용자 설명서차례Master Table of Contents8Safety2Section A - Installation9Section B - Operation23Section C - Accessories33Section D - Maintenance35Section E - Theory of Operation39Section F - Theory of Operation47Symptoms50Major physical or electrical damage is evident when the sheet metal cover is removed.50The machine is dead—no output—no LED’s.50The main input fuses (or breaker) repeatedly fail.50The machine does not have welding output.51The POWER WAVE 355M/405M will not produce full output.51The machine regularly overheats and the yellow thermal light is ON indicating a thermal overload.52An attached wire feeder will not function correctly. Apparently the wire feeder is not being powered up.52The machine often “noodle welds” with a particular procedure. The output is limited to approximately 100 amps.53Excessively long and erratic arc.53Auxiliary receptacle is “dead” no auxiliary voltage.54A fault or error code is displayed.54General degradation of the weld performance.54Section G - Diagrams125크기: 4.93메가바이트페이지: 137Language: English매뉴얼 열기