사용자 설명서차례S14000.A1LSI608001PCI to USB Host Adapter1USER’S1GUIDE1This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con...21. This device may not cause harmful interference, and22. This device must accept any interference received, including interference that may cause undes...2This equipment has been tested and found to comply with the limits for a Class B digital device, ...2Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of...2The LSI Logic LSI60800 is tested to comply with FCC standards for home or office use.2This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipm...2Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel ...2This is a Class B product based on the standard of the Voluntary Control Council for Interference...2LSI60800 PCI to USB Host Adapter3User’s Guide3Version 1.131 What is Covered in This Guide3Figure1 LSI60800 Board42 Hardware Installation4Important41. Remove the cover on your computer to access the PCI slots. Refer to your computer documentatio...42. Locate an unused PCI expansion slot for installing the LSI60800 Board. Refer to your computer ...43. Remove the blank bracket panel on the back of the computer that covers the slot you intend to ...44. Remove the LSI60800 Board from the antistatic bag and insert the edge connector into the PCI s...55. Visually check to make sure the LSI60800 Board is properly seated, and is all the way down in ...56. Screw the bracket down with the screw from step 3.5Figure2 Inserting the LSI60800 Board53 LSI60800 Software Installation63.1 Verifying the Installation61. From the Windows 98 Start menu, select Settings, then Control Panel.62. From the Control Panel window, double-click the System icon. The System Properties menu displays.63. Select the Device Manager tab.64. Click on the “+” box next to “Universal Serial Bus Controller”. Figure3 shows a properly inst...6Figure3 System Properties Window - Device Manager Tab75. Click on Close.74 Connect the USB Devices71. Load the USB device driver supplied by the USB device manufacturer following the procedure pro...72. Plug in the USB device using the correct cable (see below). There is no need to turn off the c...73. The device driver should load automatically without any user interaction.74.1 Cabling84.2 Hubs8Notes9Notes10크기: 71.3킬로바이트페이지: 10Language: English매뉴얼 열기