사용자 설명서차례1. Introduction52. Assembly of sensors62.1. The size of the projection field62.2. Number of sensors to be installed82.2.1. SMC Firmware 1.x82.3. Position of the projection field92.4. Floor markings112.5. Connector assignment122.6. Connection of sensors to the SMC133. Connecting SMCs together144. PC, Modem, Com Server154.1. End equipment connected to the RS232 port of a single SMC154.2. End equipment connected with the RS485 bus for more than one SMC165. Operating the SMC175.1. Terminal settings175.2. General operation195.2.1. Interrogation into SMCs connected195.2.2. Activating the SMC195.3. Firmware 1.x205.3.1. Sensor measurement data, counting parameters of the SMC215.3.2. Additional setting parameters235.3.3. Live Mode255.3.4. Control Counting265.3.5. Automatic Calibration275.3.6. Configuration Menu285.3.7. Sensor measurements, control counting305.3.8. Agreeing control counts325.3.9. Firmware update for the SMC335.3.10. SMC Error Log365.3.10.1. Memory location and name365.3.10.2. File structure375.3.10.3. Structure of an entry385.3.10.4. Description of error types395.3.10.5. Examples395.3.11 Trouble Shooting426. Operating the sensors – Version KF32.x436.1. Version info on KF sensors436.2. Auto-test446.3. Firmware Update45Appendix47A1 - Separating an installation cable47A2 – Suitable installation cable for Publicount i50A3 - Known errors with the SMC firmware51A3.1 –SMC Version 1.151A4. Optional: Connection via Bluetooth52A4.1. Producing the connection to the SMC52A4.2. Other commands53크기: 957킬로바이트페이지: 53Language: English매뉴얼 열기