매뉴얼차례Notes About the Discs3This Player Can Play the Following Discs4About This Manual8Package Contents9Remote Control10TV Menus11Attaching the DVD Player to Your TV131 Insert the guide pins on the bracket into the guide holes on the TV. The holes on the bracket should align to the holes on the TV.132 Insert the two plastic fasteners (supplied) into the holes, then press in the head of the fasteners until they click.133 Slide the DVD player onto the bracket with the DVD slot facing the outer edge of the TV.131 With the bracket fully extended, insert the guide pins on the bracket into the guide holes on the TV. The holes on the bracket should align to the holes on the TV.152 Insert the 2 plastic fasteners (supplied) into the holes, then press in the head of the fasteners until they click.153 Slide the bracket so that the viewing window covers the corresponding number (see the illustrations and table on the previous page). If the viewing window indicates Bracket Setting 2, be sure to use a Velcro strip (supplied); see previous page.154 Align the slider on the bottom of the receiver unit with the groove of the installation bracket.155 Slide down the DVD player onto the bracket with the DVD slot facing the outer edge of the TV. Before proceeding to the next step, make sure that you are satisfied with the position of the DVD player in relation to the TV.156 Secure the location of the sliding bracket by screwing the Thumb Screw into the screw point located just beneath the viewing window. If Bracket Setting 2 is used, peel off the arrow label by pulling downwards, and firmly press the bracket onto the TV.15Locating the Essential Parts16Connecting Your DVD Player161 Connect the L-shaped end of the HDMI cable (supplied) to the HDMI OUT on the DVD player, then connect the straight end of the HDMI cable to any HDMI IN on the TV 1.162 Connect the supplied AC adapter with AC power cord between the DC IN 12V and the nearest wall outlet 3.163 For models with XMB™ menu only: Connect the supplied USB cable between the DVD player’s DMex port and the DMex/SERVICE port on the TV 2.16Configuring Your TV to Operate the DVD Player171 Press HOME on the remote control and select HDMI Settings.172 Select Control for HDMI or HDMI Control.173 Highlight On and press and exit the menu.171 Press HOME on the remote control and select Setup.172 Select Control for HDMI.173 Highlight On and press .174 Highlight Update Control for HDMI List, select OK and exit the menu.17How to Insert and Eject Discs17Guide to the Control Menu Display191 Turn on the TV.192 Press the HOME button on the remote control.193 Highlight the Settings icon.194 Press the v button and highlight the DVD Link Settings icon.195 Press .191 Turn on the TV.192 Press the HOME button on the remote control.193 Select the External Inputs menu.194 Highlight DVD Link and press .195 Press the DISPLAY button.196 Navigate to (SETUP) using V/v.197 Press .19Control Icons and Descriptions21Playing Discs221 Turn on the TV.222 Insert a disc into the player (see page 17).223 Press HOME on the remote control224 Highlight the Photo, Music, or Video icon. These icons are added to the XMB™ when the associated content is available on the disc.225 Highlight your selection and press .221 Turn on the TV.222 Insert a disc into the player (see page 17).223 Press HOME on the remote control.224 Highlight the External Inputs category and press .225 Highlight DVD Link and press to switch to the DVD player.22Resuming Playback From the Point Where You Stopped the Disc (Multi-disc Resume)231 While playing a disc, press x to stop playback. “Disc resumes from this point” appears on the screen.232 Press N. The player starts playback from the point where you stopped the disc in step 1.231 Press to access the DVD Menu or to access the Top Menu. The disc’s menu appears on the TV screen. The contents of the menu vary from disc to disc.232 Press B/V/v/b to highlight the item you want to play or change.233 Press .231 Press DISPLAY when the player is in stop mode. The Control Menu appears.232 Press V/v to highlight (ORIGINAL/PLAY LIST), then press . The options for “ORIGINAL/PLAY LIST” appear.233 Press V/v to highlight a setting. PLAY LIST: plays the titles created from “ORIGINAL” for editing. ORIGINAL: plays the titles originally recorded.234 Press .231 Press + 6 during playback. The following display appears.242 Press + 6 repeatedly to change the time information. The available time information depends upon the type of disc you are playing.241 Press DISPLAY. The Control Menu appears.252 Press V/v to highlight (PROGRAM), then press . The options for “PROGRAM” appear.253 Press V/v to highlight “SET b,” then press .254 Press b. The cursor moves to the title or track row “T” (in this case, “01”).255 Select the title, chapter, or track you want to program. When playing a DVD VIDEO For example, select chapter “03” of title “0...256 To program other titles, chapters, or tracks, repeat steps 4 to 5. The programmed titles, chapters, and tracks are displayed in the selected order.257 Press to start Program Play. Program Play begins. When the program ends, you can restart the same program again by pressing .251 Follow steps 1 to 3 of “Creating your own program (Program Play).”262 Select the program number of the title, chapter, or track you want to change or cancel using B/b and press .263 Follow step 5 for new programming. To cancel a program, select “--” under “T,” then press .261 Press DISPLAY during playback. The Control Menu appears.262 Press V/v to highlight (SHUFFLE), then press . The options for “SHUFFLE” appear.263 Press V/v to select the item to be shuffled.264 Press N. Shuffle Play starts.261 Press DISPLAY during playback. The Control Menu appears.262 Press V/v to highlight (REPEAT), then press . The options for “REPEAT” appear.263 Press V/v to select the item to be repeated.264 Press N. Repeat Play starts.261 Press DISPLAY during playback. The Control Menu appears.272 Press V/v to highlight (A-B REPEAT), then press . The options for “A-B REPEAT” appear.273 Press V/v to highlight “SET t,” then press . The “A-B REPEAT” setting bar appears.274 During playback, when you find the starting point (point A) of the portion to be played repeatedly, press . The starting point (point A) is set.275 When you reach the ending point (point B), press again. The set points are displayed and the player starts repeating this specific portion.27Adjusting the Playback Picture (CUSTOM PICTURE MODE)281 Press DISPLAY twice during playback. The Control Menu appears.282 Press V/v to highlight (CUSTOM PICTURE MODE), then press . The options for “CUSTOM PICTURE MODE” appear.283 Press V/v to highlight the setting you want. The default setting is underlined.284 Press . The selected setting takes effect.281 In step 3 of “Adjusting the Playback Picture,” select “MEMORY” and press . The “PICTURE” adjustment bar appears.282 Press B/b to adjust the picture contrast. To go to the next or previous picture item without saving the current setting, press V/v.283 Press . The adjustment is saved and the “BRIGHTNESS” adjustment bar appears.284 Repeat step 2 and 3 to adjust “BRIGHTNESS,” “COLOR” and “HUE.”28Sharpening the Picture (SHARPNESS)291 Press DISPLAY twice during playback. The Control Menu appears.292 Press V/v to highlight (SHARPNESS), then press . The options for “SHARPNESS” appear.293 Press V/v to highlight a level. 1: enhances the outline. 2: further enhances the outline.294 Press . The selected setting takes effect.29Adjusting the Delay Between the Picture and Sound (AV SYNC)291 Press DISPLAY twice during playback. The Control Menu appears.292 Press V/v to highlight (AV SYNC), then press . The following display appears.293 Press v to highlight “SET t”, then press . The “AV SYNC” adjustment bar appears.294 Press b repeatedly to adjust the delay. Each time you press B/b, the delay is adjusted by 10 milliseconds.295 Press . The selected setting takes effect.29Locking Discs (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL)301 Insert the disc you want to lock. If the disc is playing, press x to stop playback.302 Press DISPLAY while the player is in stop mode. The Control Menu appears.303 Press V/v to highlight (PARENTAL CONTROL), then press . The options for “PARENTAL CONTROL” appear.304 Press V/v to highlight “ON t,” then press .305 Enter or re-enter your 4-digit password using the number buttons, then press . “Custom parental control is set.” appears and then the screen returns to the Control Menu.301 Follow steps 1 to 3 of “Custom Parental Control.”302 Press V/v to highlight “OFF t,” then press .303 Enter your 4-digit password using the number buttons, then press .301 Insert the disc for which Custom Parental Control is set. The “CUSTOM PARENTAL CONTROL” display appears.312 Enter your 4-digit password using the number buttons, then press . The player is ready for playback.311 Press DISPLAY while the player is in stop mode. The Control Menu appears.312 Press V/v to highlight (PARENTAL CONTROL), then press . The options for “PARENTAL CONTROL” appear.313 Press V/v to highlight “PLAYER t,” then press .314 Enter or re-enter your 4-digit password using the number buttons, then press . The display for setting the playback limitation level appears.315 Press V/v to highlight “STANDARD,” then press . The options for “STANDARD” are displayed.316 Press V/v to highlight a geographic area as the playback limitation level, then press . The area is selected. When you select “OTHERS t,” select and enter a Parental Control Area code from the table on page 51 using the number buttons.327 Press V/v to highlight “LEVEL,” then press . The ratings restriction options available in “LEVEL” are displayed.328 Select the level you want using V/v, then press . Parental Control setting is complete. The lower the value, the stricter the limitation.321 Insert the disc and press N. The display for entering your password appears.322 The display for entering your password to temporarily disable the Parental Control appears.323 Enter your 4-digit password using the number buttons, then press . The player starts playback.321 Press DISPLAY while the player is in stop mode. The Control Menu appears.322 Press V/v to highlight (PARENTAL CONTROL), then press . The options for “PARENTAL CONTROL” appear.323 Press V/v to highlight “PASSWORD t,” then press . The password entry screen appears.324 Enter your 4-digit password using the number buttons, then press .325 Enter a new 4-digit password using the number buttons, then press .326 To confirm your new password, re-enter it using the number buttons, then press .32DVD Disc Operations331 Press DISPLAY (When playing a DATA CD or DATA DVD with JPEG image files, press twice). The Control Menu appears.332 Press V/v to select the search method. When playing a DVD TITLE CHAPTER TIME/TEXT333 Press . “** (**)” changes to “-- (**).”334 Press the number buttons to select the title, chapter, or track number you want to search.335 Press . The player starts playback from the selected number.331 In step 2, highlight TIME/TEXT. “T **:**:**” (playing time of the current title) is selected.342 Press . “T **:**:**” changes to “T --:--:--.”343 Input the time code using the number buttons, then press . For example, to find the scene at 2 hours, 10 minutes, and 20 seconds after the beginning, enter “2:10:20.”34Changing the Sound341 Press + 4 during playback. The following display appears.342 Press + 4 repeatedly to select the desired audio signal.34TV Virtual Surround Settings (TVS)351 Press + 0 during playback. The following display appears.352 Press + 0 repeatedly to select one of the TVS sounds.35Using the Setup Menu371 Press DISPLAY when the player is in stop mode. The Control Menu appears.372 Press V/v to highlight (SETUP), then press . The options for “SETUP” appear.373 Press V/v to highlight “CUSTOM,” then press . The Setup Menu appears.374 Press V/v to highlight the setup item from the displayed list: “LANGUAGE SETUP,” “SCREEN SETUP,” “CUSTOM SETUP,” or “AUDIO SETUP.” Then press . The Setup item is selected.375 Press V/v to highlight an item, then press . The options for the selected item appear. Example: “TV TYPE”376 Press V/v to highlight a setting, then press . The setting is selected and setup is complete. Example: “HDMI RESOLUTION”371 Highlight “RESET” in step 3 and press .382 Highlight “YES” using V/v. You can also quit the process and return to the Control Menu by selecting “NO” here.383 Press . All the settings explained on pages page 37 to page 41 return to the default settings. Do not press while resetting the player, which takes a few seconds to complete.38Setting the Display or Sound Track Language (LANGUAGE SETUP)38About MP3 Audio Tracks and JPEG Image Files43Viewing JPEG Images as a Slide Show441 TVs with XMB™: On the XMB™, navigate to the Photo category, then highlight and select the DVD Link Photo icon (see page 22). TVs with Panel menu: Select DVD Link from the External Inputs menu.442 When the Data Disc Menu appears, press V/v to highlight the album you want to play.443 Press .441 Press DISPLAY during stop mode.442 Press V/v to highlight (MODE (MP3, JPEG)) and press .443 Press V/v to highlight “AUTO” (default), and press .454 Press OPTIONS to access the Data Disc Menu455 Press V/v to highlight the album that contains both the MP3 audio tracks and JPEG images you want to play.456 Press .451 Press DISPLAY twice while viewing a JPEG image or when the player is in stop mode.452 Press V/v to highlight (INTERVAL), then press .453 Press V/v to highlight a setting.454 Press .451 Press DISPLAY twice while viewing a JPEG image or when the player is in stop mode.462 Press V/v to highlight (EFFECT), then press .463 Press V/v to highlight a setting.464 Press .461 TVs with XMB™: On the XMB™, navigate to the Photo category, then highlight and select the DVD Link Photo icon. TVs with Panel menu: Select DVD Link from the External Inputs menu.462 When the Data Disc Menu appears, press to access the thumbnail screen.463 Press B/v/V/b to highlight the image you want to view, then press .46Playing MP3 Audio Tracks471 TVs with XMB™: On the XMB™, navigate to the Music category, then highlight and select the DVD Link Music icon (see page 22). TVs with Panel menu: Select DVD Link from the External Inputs menu.472 When the Data Disc Menu appears, press V/v to highlight the album you want to play.473 Press .471 In DVD Player mode, press OPTIONS to display the Data Disc Menu.472 Press V/v to highlight an album and press .473 Press V/v to highlight a track and press . Playback begins from the selected track.47Troubleshooting49Language Code List51Parental Control Area Code List51크기: 4메가바이트페이지: 56Language: English매뉴얼 열기
