Troy-Bilt 546 사용자 매뉴얼

차례

• Figure 1

  7
• NOTE: Reference to right or left hand side of the mower is observed from the operating position.

  7
  • Figure 2

    7
  • Figure 3

    7
  • Figure 4

    7
  • Figure 5

    8
• NOTE: Your mower is shipped with the handle in the higher position. If you wish to lower the height of the handle, refer to the Adjustment Section at this time.

  8
  • Figure 6

    8
  • Figure 7

    8
• NOTE: If the grass catcher came pre-assembled, proceed to the next section. If it came unassembled, follow the steps below to assemble it first, before attaching to the mower.

  8
  • Figure 8

    8
  • Figure 9

    9
  • Figure 10

    9
  • Figure 11

    9
• NOTE: You must service the engine with oil and gasoline before starting the mower for the first time. Check oil and gasoline levels and fill up as necessary for subsequent starts.

  10
• NOTE: See your engine manual packed with your unit for more detailed instructions.

  10
  • Figure 12

    11
• NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit. These may cause damage to bearings or the engine. The use of water will result in shortened life and reduce serviceability.

  12
  • Figure 13

    12
• NOTE: To ensure safe operation of your mower, periodically check the blade bolt for correct torque.

  13
• NOTE: For repairs beyond the minor adjustments listed above, contact your local authorized service dealer.

  13