Yamaha RX-A1030BL Manual Do Utilizador

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

❑ Extra Bass

Sets the speakers to produce the front channel low-frequency components.

• This setting is not available when “Subwoofer” is set to “None”, or when “Front” is set to “Small”.

❑ Bass Cross Over

Sets the lower limit of the low-frequency components that can be output from a speaker 
whose size is set to “Small”. A frequency sound lower than the specified value will be 
produced from the subwoofer or front speakers.

40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz

• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and 

crossover frequency to maximum.

■

Sets the distance between each speaker and listening position so that sounds from the 
speakers reach the listening position at the same time. First, select the unit of distance 
from “Meter” or “Feet”.

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, 
Front Presence L, Front Presence R, Subwoofer

0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments

3.00 m (10.0 ft)

■

Adjusts the volume of each speaker.

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, 
Front Presence L, Front Presence R, Subwoofer

-10.0 dB to +10.0 dB (0.5 dB increments)

0.0 dB

■

Adjusts the tone with an equalizer.

• “YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “Auto 

Setup” have already been saved (p.41). Press ENTER again to view the measurement results.

■

• To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”.

• To copy the parametric equalizer values acquired with “Auto Setup” (p.41) to the “Manual” fields for 

fine adjustment, select “PEQ Data Copy” and then an equalizer type.

Off (default)

Depending on the size of the front speakers, either the subwoofer or 
front speakers produce the front channel low-frequency components.

On

Both the front speakers and subwoofer produce the front channel 
low-frequency components.

Manual

Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.

YPAO:Flat

Adjusts individual speakers to achieve the same characteristics.

YPAO:Front

Adjusts individual speakers to achieve the same characteristics as 
the front speakers.

YPAO:Natural

Adjusts all speakers to achieve a natural sound.

Through

Does not use the equalizer.